Package: python-apt-common
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 232
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-apt
Version: 1.1.0~beta1ubuntu0.16.04.5
Replaces: python-apt (<< 0.7.98+nmu1)
Depends: python | python3
Breaks: python-apt (<< 0.7.98+nmu1)
Enhances: python-apt, python3-apt
Description: Python interface to libapt-pkg (locales)
 The apt_pkg Python interface will provide full access to the internal
 libapt-pkg structures allowing Python programs to easily perform a
 variety of functions.
 .
 This package contains locales.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: zerofree
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.3-1
Depends: e2fslibs (>= 1.37), libc6 (>= 2.3.4)
Description: zero free blocks from ext2, ext3 and ext4 file-systems
 Zerofree finds the unallocated blocks with non-zero value content in
 an ext2, ext3 or ext4 file-system and fills them with zeroes
 (zerofree can also work with another value than zero). This is mostly
 useful if the device on which this file-system resides is a disk
 image. In this case, depending on the type of disk image, a secondary
 utility may be able to reduce the size of the disk image after
 zerofree has been run. Zerofree requires the file-system to be
 unmounted or mounted read-only.
 .
 The usual way to achieve the same result (zeroing the unused
 blocks) is to run "dd" to create a file full of zeroes that takes up
 the entire free space on the drive, and then delete this file. This
 has many disadvantages, which zerofree alleviates:
  * it is slow;
  * it makes the disk image (temporarily) grow to its maximal extent;
  * it (temporarily) uses all free space on the disk, so other
    concurrent write actions may fail.
 .
 Zerofree has been written to be run from GNU/Linux systems installed
 as guest OSes inside a virtual machine. If this is not your case, you
 almost certainly don't need this package. (One other use case would
 be to erase sensitive data a little bit more securely than with a
 simple "rm").
Original-Maintainer: Thibaut Paumard <thibaut@debian.org>
Homepage: http://intgat.tigress.co.uk/rmy/uml/index.html

Package: libedit2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 245
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libedit
Version: 3.1-20150325-1ubuntu2
Depends: libbsd0 (>= 0.0), libc6 (>= 2.17), libtinfo5 (>= 6)
Description: BSD editline and history libraries
 Command line editor library provides generic line editing,
 history, and tokenization functions.
 .
 It slightly resembles GNU readline.
Homepage: http://www.thrysoee.dk/editline/
Original-Maintainer: LLVM Packaging Team <pkg-llvm-team@lists.alioth.debian.org>

Package: python3-cryptography
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 1389
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-cryptography
Version: 1.2.3-1ubuntu0.2
Depends: python3 (<< 3.6), python3 (>= 3.5~), python3-cffi-backend-api-9729, python3-idna, python3-pkg-resources, python3-pyasn1 (>= 0.1.8), python3-six (>= 1.4.1), libc6 (>= 2.4), libssl1.0.0 (>= 1.0.2~beta3)
Suggests: python-cryptography-doc, python3-cryptography-vectors
Description: Python library exposing cryptographic recipes and primitives (Python 3)
 The cryptography library is designed to be a "one-stop-shop" for
 all your cryptographic needs in Python.
 .
 As an alternative to the libraries that came before it, cryptography
 tries to address some of the issues with those libraries:
  - Lack of PyPy and Python 3 support.
  - Lack of maintenance.
  - Use of poor implementations of algorithms (i.e. ones with known
    side-channel attacks).
  - Lack of high level, "Cryptography for humans", APIs.
  - Absence of algorithms such as AES-GCM.
  - Poor introspectability, and thus poor testability.
  - Extremely error prone APIs, and bad defaults.
 .
 This package contains the Python 3 version of cryptography.
Homepage: https://cryptography.io/
Original-Maintainer: Tristan Seligmann <mithrandi@debian.org>

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 300
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.2ubuntu2.1
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libncurses5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 281
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20160213-1ubuntu1
Depends: libtinfo5 (= 6.0+20160213-1ubuntu1), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: python3.5
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 303
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 3.5.2-2ubuntu0~16.04.8
Depends: python3.5-minimal (= 3.5.2-2ubuntu0~16.04.8), libpython3.5-stdlib (= 3.5.2-2ubuntu0~16.04.8), mime-support
Suggests: python3.5-venv, python3.5-doc, binutils
Description: Interactive high-level object-oriented language (version 3.5)
 Python is a high-level, interactive, object-oriented language. Its 3.5 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: dmeventd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 173
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lvm2 (2.02.133-1ubuntu10)
Version: 2:1.02.110-1ubuntu10
Depends: libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.110), libdevmapper1.02.1 (>= 2:1.02.110), liblvm2cmd2.02 (>= 2.02.133), init-system-helpers (>= 1.18~)
Description: Linux Kernel Device Mapper event daemon
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a daemon to monitor events of devmapper devices.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: libpython3-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3-defaults
Version: 3.5.1-3
Depends: libpython3.5-stdlib (>= 3.5.1-2~)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.5).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/

Package: liblxc1
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 835
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxc
Version: 2.0.11-0ubuntu1~16.04.3
Replaces: liblxc0, lxc (<< 0.9.0~alpha3-0ubuntu1~)
Provides: liblxc0
Depends: cgroup-lite | systemd, lxc-common (= 2.0.11-0ubuntu1~16.04.3), rsync, libc6 (>= 2.17), libcap2 (>= 1:2.10), libgnutls30 (>= 3.4.0), libseccomp2 (>= 1.0.1), libselinux1 (>= 1.32)
Recommends: lxcfs, uidmap
Breaks: lxc (<< 0.9.0~alpha3-0ubuntu1~)
Conflicts: liblxc0
Description: Linux Containers userspace tools (library)
 Containers are insulated areas inside a system, which have their own namespace
 for filesystem, network, PID, IPC, CPU and memory allocation and which can be
 created using the Control Group and Namespace features included in the Linux
 kernel.
 .
 This package contains the libraries.
Homepage: https://linuxcontainers.org

Package: libapt-pkg5.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 2833
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.2.32
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), libsystemd0 (>= 221), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 1.2.32)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:2.4.5-1ubuntu2.1
Depends: libaudit-common (>= 1:2.4.5-1ubuntu2.1), libc6 (>= 2.14)
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: http://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: readline-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 76
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: readline6
Version: 6.3-8ubuntu2
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Suggests: readline-doc
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-yaml
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 425
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pyyaml
Version: 3.11-3build1
Depends: python3 (<< 3.6), python3 (>= 3.5~), libc6 (>= 2.14), libyaml-0-2
Description: YAML parser and emitter for Python3
 Python3-yaml is a complete YAML 1.1 parser and emitter for Python3.  It can
 parse all examples from the specification. The parsing algorithm is simple
 enough to be a reference for YAML parser implementors. A simple extension API
 is also provided.  The package is built using libyaml for improved speed.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://pyyaml.org/

Package: makedev
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.3.1-93ubuntu2~ubuntu16.04.1
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: cloud-guest-utils
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 55
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-utils
Version: 0.27-0ubuntu25.1
Replaces: cloud-utils (<< 0.27-0ubuntu3)
Depends: e2fsprogs (>= 1.4), util-linux (>= 2.17.2), python3:any
Recommends: gdisk | util-linux (>= 2.26.3)
Breaks: cloud-utils (<< 0.27-0ubuntu3)
Description: cloud guest utilities
 This package contains programs useful inside cloud instance.
 It contains 'growpart' for resizing a partition during boot.

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 468
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20160213-1ubuntu1
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libapt-inst2.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 465
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.2.32
Depends: libapt-pkg5.0 (>= 1.1~exp9), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Description: deb package format runtime library
 This library provides methods to query and extract information
 from deb packages. This includes the control data and the package
 file content.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libgdbm3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gdbm
Version: 1.8.3-13.1
Depends: libc6 (>= 2.14), dpkg (>= 1.15.4) | install-info
Pre-Depends: multiarch-support
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://directory.fsf.org/project/gdbm/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7096
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: perl
Version: 5.22.1-9ubuntu0.6
Replaces: libfile-path-perl (<< 2.09), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.37), libscalar-list-utils-perl (<< 1:1.41), libsocket-perl (<< 2.018), libxsloader-perl (<< 0.20), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.22.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libfile-path-perl (<< 2.09), libfile-spec-perl (<< 3.5600), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.37), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.41), libsocket-perl (<< 2.018), libxsloader-perl (<< 0.20), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.22.1~), perl-modules (<< 5.22.1~)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.22"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 207
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 229-4ubuntu21.22
Depends: libc6 (>= 2.16)
Description: libudev shared library
 This library provides access to udev device information.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libnettle6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 350
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.2-1ubuntu0.16.04.1
Depends: libc6 (>= 2.14)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>

Package: git-man
Status: install ok installed
Priority: optional
Section: doc
Installed-Size: 1421
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: git
Version: 1:2.7.4-0ubuntu1.6
Replaces: git (<< 1:1.7.4~rc1), git-core (<< 1:1.7.0.4-1.)
Breaks: git (<< 1:1.7.4~rc1)
Description: fast, scalable, distributed revision control system (manual pages)
 Git is popular version control system designed to handle very large
 projects with speed and efficiency; it is used for many high profile
 open source projects, most notably the Linux kernel.
 .
 Git falls in the category of distributed source code management tools.
 Every Git working directory is a full-fledged repository with full
 revision tracking capabilities, not dependent on network access or a
 central server.
 .
 This package provides reference documentation for use by the 'man'
 utility and the 'git help' command.
Homepage: https://git-scm.com/
Original-Maintainer: Gerrit Pape <pape@smarden.org>

Package: eatmydata
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: libeatmydata
Version: 105-3
Depends: libeatmydata1 (>= 105-3)
Description: Library and utilities designed to disable fsync and friends
 This package contains a small LD_PRELOAD library (libeatmydata) and a couple
 of helper utilities designed to transparently disable fsync and friends (like
 open(O_SYNC)). This has two side-effects: making software that writes data
 safely to disk a lot quicker and making this software no longer crash safe.
 .
 You will find eatmydata useful if particular software calls fsync(), sync()
 etc. frequently but the data it stores is not that valuable to you and you may
 afford losing it in case of system crash. Data-to-disk synchronization calls
 are typically very slow on modern file systems and their extensive usage might
 slow down software significantly. It does not make sense to accept such a hit
 in performance if data being manipulated is not very important.
 .
 On the other hand, do not use eatmydata when you care about what software
 stores or it manipulates important components of your system. The library is
 called libEAT-MY-DATA for a reason.
Original-Maintainer: Mattia Rizzolo <mattia@debian.org>
Homepage: https://launchpad.net/libeatmydata

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 316
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.11+dfsg-5ubuntu1
Replaces: cpio-mt
Depends: libc6 (>= 2.17)
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: libpopt0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 128
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: popt
Version: 1.16-10
Replaces: popt
Depends: libc6 (>= 2.17)
Pre-Depends: multiarch-support
Conflicts: libpopt-dev (<= 1.4-1), popt, rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.
Original-Maintainer: Paul Martin <pm@debian.org>
Homepage: http://rpm5.org/

Package: powermgmt-base
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.31+nmu1
Replaces: apmd (<= 3.0.2-1.17)
Description: Common utils and configs for power management
 This package contains utilities and configuration files
 for power management that are common to APM and ACPI.
Original-Maintainer: Chris Hanson <cph@debian.org>

Package: kmod
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 237
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 22-1ubuntu5.2
Depends: libc6 (>= 2.17), libkmod2 (= 22-1ubuntu5.2), lsb-base (>= 4.1+Debian11ubuntu7)
Breaks: oss-compat (= 4)
Conffiles:
 /etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
 /etc/init.d/kmod 7ac127a1706d94704d6e5de99c8ef14a
 /etc/init/kmod.conf 2686532745c8b71d6d3df91c3a53aef3
 /etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
 /etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
 /etc/modprobe.d/blacklist-framebuffer.conf 662be7eaefa6b67fcddb5d90981e1c29
 /etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
 /etc/modprobe.d/blacklist-watchdog.conf 55327f9270c8a6257a833c4d127a39e1
 /etc/modprobe.d/blacklist.conf 46378b3789cf6d2ea9da9276e1106f2c
 /etc/modprobe.d/iwlwifi.conf f27bc645e93e20c8e532325d190ac8ee
 /etc/modprobe.d/mlx4.conf b2a0bedb7461daeb0138270639581bbf
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
 It replaces module-init-tools.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: attr
Version: 1:2.4.47-2
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libk5crypto3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 290
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.13.2+dfsg-5ubuntu2.1
Depends: libc6 (>= 2.14), libkrb5support0 (>= 1.13~alpha1+dfsg)
Suggests: krb5-doc, krb5-user
Breaks: libgssapi-krb5-2 (<= 1.10+dfsg~alpha1), libkrb5-3 (<= 1.8~aa)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries - Crypto Library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime cryptography libraries used by
 applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 98
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.13-1ubuntu1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libexpat1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 364
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: expat
Version: 2.1.0-7ubuntu0.16.04.5
Depends: libc6 (>= 2.14)
Conflicts: wink (<= 1.5.1060-4)
Description: XML parsing C library - runtime library
 This package contains the runtime, shared library of expat, the C
 library for parsing XML. Expat is a stream-oriented parser in
 which an application registers handlers for things the parser
 might find in the XML document (like start tags).
Homepage: http://expat.sourceforge.net
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 305
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils
Version: 5.1.1alpha+20120614-2ubuntu2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: klibc-utils
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 384
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: klibc
Version: 2.0.4-8ubuntu1.16.04.4
Depends: libklibc (= 2.0.4-8ubuntu1.16.04.4)
Breaks: initramfs-tools (<< 0.103)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: maximilian attems <maks@debian.org>

Package: update-manager-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 160
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:16.04.15
Replaces: update-manager (<< 1:0.146.2)
Depends: python3:any (>= 3.2~), python3-update-manager (= 1:16.04.15), lsb-release, ubuntu-release-upgrader-core
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: computer-janitor (<= 1.11-0ubuntu1), update-manager (<< 1:0.146.2)
Description: manage release upgrades
 This is the core of update-manager and the release upgrader

Package: pollinate
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 53
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 4.33-0ubuntu1~16.04.1
Depends: init-system-helpers (>= 1.18~), lsb-base (>= 4.1+Debian11ubuntu7), curl, adduser, bsdutils, vim-common
Conffiles:
 /etc/default/pollinate a9f810379e139b53608f090ebd954954
 /etc/init/pollinate.conf caebd32090c833cca05ae433c235d36f
 /etc/pollinate/entropy.ubuntu.com.pem 9f437b2251c81f7ddf7624ac761ba249
Description: seed the pseudo random number generator
 This client will connect to one or more Pollen (entropy-as-a-service)
 servers over an (optionally) encrypted connection and retrieve a random
 seed over HTTP or HTTPS.
 This is particularly useful at the first boot of cloud images and in
 virtual machines, to seed a system's random number generator at
 genesis, and is intended to supplement the /etc/init.d/urandom init script.
 It can be used on physical machines, as well, to supplement the seeding
 of the psuedo random number generator.
Homepage: http://launchpad.net/pollinate

Package: libnetfilter-conntrack3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnetfilter-conntrack
Version: 1.0.5-1
Depends: libc6 (>= 2.14), libmnl0 (>= 1.0.3-4~), libnfnetlink0
Description: Netfilter netlink-conntrack library
 libnetfilter_conntrack is a userspace library providing a programming
 interface (API) to the in-kernel connection tracking state table.
Original-Maintainer: Alexander Wirt <formorer@debian.org>
Homepage: http://www.netfilter.org/projects/libnetfilter_conntrack/

Package: vlan
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.9-3.2ubuntu1.16.04.5
Depends: libc6 (>= 2.4), iproute2
Conffiles:
 /etc/network/if-post-down.d/vlan 77c82c91231fdf9f219fa6cfd00dcecd
 /etc/network/if-pre-up.d/vlan ad17387305d0fb264004db0703369da2
 /etc/network/if-up.d/ip bf8f08cde1934f2ad51d633cc667c6df
 /etc/network/if-up.d/vlan e8e8d8226f349113d40282b7d8515f7a
Description: user mode programs to enable VLANs on your ethernet devices
 This package contains the user mode programs you need to add and remove
 VLAN devices from your ethernet devices.
 .
 A typical application for a VLAN enabled box is a single wire firewall,
 router or load balancer.
 .
 You need a VLAN Linux kernel for this.  Linux kernel versions >= 2.4.14
 have VLAN support.
Original-Maintainer: Ard van Breemen <ard@kwaak.net>

Package: libpam-systemd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 356
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 229-4ubuntu21.22
Depends: libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), systemd (= 229-4ubuntu21.22), libpam-runtime (>= 1.0.1-6), dbus, systemd-shim (>= 8-2) | systemd-sysv
Description: system and service manager - PAM module
 This package contains the PAM module which registers user sessions in
 the systemd control group hierarchy for logind.
 .
 If in doubt, do install this package.
 .
 Packages that depend on logind functionality need to depend on libpam-systemd.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 271
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.2ubuntu2.1
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: python3-apt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 618
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python-apt
Version: 1.1.0~beta1ubuntu0.16.04.5
Replaces: python-apt (<< 0.7.98+nmu1)
Provides: python3.5-apt
Depends: python3 (<< 3.6), python3 (>= 3.5~), libapt-inst2.0 (>= 1.2.28~), libapt-pkg5.0 (>= 1.2.28~), libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), python-apt-common
Recommends: lsb-release, iso-codes
Suggests: python3-apt-dbg, python-apt-doc
Breaks: python-apt (<< 0.7.98+nmu1)
Description: Python 3 interface to libapt-pkg
 The apt_pkg Python 3 interface will provide full access to the internal
 libapt-pkg structures allowing Python 3 programs to easily perform a
 variety of functions, such as:
 .
  - Access to the APT configuration system
  - Access to the APT package information database
  - Parsing of Debian package control files, and other files with a
    similar structure
 .
 The included 'aptsources' Python interface provides an abstraction of
 the sources.list configuration on the repository and the distro level.
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: python3-dbus
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 377
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dbus-python
Version: 1.2.0-3
Provides: python3.5-dbus
Depends: python3 (<< 3.6), python3 (>= 3.5~), libc6 (>= 2.4), libdbus-1-3 (>= 1.9.14), libdbus-glib-1-2 (>= 0.78), libglib2.0-0 (>= 2.12.0)
Recommends: python3-gi | python3-dbus.mainloop.qt
Suggests: python-dbus-doc, python3-dbus-dbg
Description: simple interprocess messaging system (Python 3 interface)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a Python 3 interface to D-Bus.
 .
 See the dbus description for more information about D-Bus in general.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: http://www.freedesktop.org/wiki/Software/DBusBindings#Python

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 472
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.25-1~16.04.1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.gnu.org/software/grep/

Package: ifupdown
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 198
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 0.8.10ubuntu1.4
Replaces: systemd (<< 228-3~)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.18~), lsb-base (>= 4.1+Debian11ubuntu7), adduser, iproute2
Recommends: isc-dhcp-client | dhcp-client
Suggests: ppp, rdnssd
Breaks: systemd (<< 228-3~)
Conffiles:
 /etc/default/networking 35cd4a2713981c9239ce4532c1bfc1c7
 /etc/init.d/networking 2c98e17c0d329b6451685ebbd0c14f81
 /etc/init/network-interface-container.conf 4daa570594afc50940f140a7731d20d1
 /etc/init/network-interface-security.conf feb6b4b52fe24c44ff1bc68addf245d6
 /etc/init/network-interface.conf aae12345eba8e946579b06798b1752c1
 /etc/init/networking.conf c50811e19bcd596d99b0467b40cfbb8b
 /etc/network/if-down.d/upstart 1a0205ddbc1446782a8d4d818e97d8a5
 /etc/network/if-up.d/upstart dfbcde4fd4a3a2553930605e03e160ab
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.
Original-Maintainer: Guus Sliepen <guus@debian.org>

Package: xfsprogs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3332
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.3.0+nmu1ubuntu1.1
Replaces: xfsdump (<< 3.0.0)
Provides: fsck-backend
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.14), libreadline5 (>= 5.2), libuuid1 (>= 2.16)
Suggests: xfsdump, acl, attr, quota
Breaks: xfsdump (<< 3.0.0)
Description: Utilities for managing the XFS filesystem
 A set of commands to use the XFS filesystem, including mkfs.xfs.
 .
 XFS is a high performance journaling filesystem which originated
 on the SGI IRIX platform.  It is completely multi-threaded, can
 support large files and large filesystems, extended attributes,
 variable block sizes, is extent based, and makes extensive use of
 Btrees (directories, extents, free space) to aid both performance
 and scalability.
 .
 Refer to the documentation at http://oss.sgi.com/projects/xfs/
 for complete details.
Homepage: http://oss.sgi.com/projects/xfs/
Original-Maintainer: XFS Development Team <xfs@oss.sgi.com>

Package: libssl1.0.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3406
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openssl
Version: 1.0.2g-1ubuntu4.15
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Description: Secure Sockets Layer toolkit - shared libraries
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It provides the libssl and libcrypto shared libraries.
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 219
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.39
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libisc-export160
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 436
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-8ubuntu1.15
Depends: libc6 (>= 2.15)
Description: Exported ISC Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libisc shared library.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: python3-serial
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 311
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyserial
Version: 3.0.1-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python3-wxgtk3.0 | python3-wxgtk
Description: pyserial - module encapsulating access for the serial port
 This module encapsulates the access for the serial port. It provides
 back-ends for standard Python running on Windows, Linux, BSD (possibly
 any POSIX compliant system). The module named "serial" automatically
 selects the appropriate back-end.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://pyserial.sourceforge.net/

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 389
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.13-1ubuntu1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: liblz4-1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lz4
Version: 0.0~r131-2ubuntu2
Depends: libc6 (>= 2.14)
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Original-Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Homepage: https://github.com/Cyan4973/lz4

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 213
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.7
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which
Original-Maintainer: Clint Adams <clint@debian.org>

Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.59ubuntu1
Recommends: file
Conffiles:
 /etc/mime.types aa13939777d1a7b82e873d5eb0282a1a
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.
Original-Maintainer: Mime-Support Maintainers <mime-support@plessy.org>

Package: python3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.5.1-3
Replaces: python3-minimal (<< 3.1.2-2)
Provides: python3-profiler
Depends: python3.5 (>= 3.5.1-2~), libpython3-stdlib (= 3.5.1-3), dh-python
Pre-Depends: python3-minimal (= 3.5.1-3)
Suggests: python3-doc (>= 3.5.1-3), python3-tk (>= 3.5.1-2~), python3-venv (>= 3.5.1-3)
Description: interactive high-level object-oriented language (default python3 version)
 Python, the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package is a dependency package, which depends on Debian's default
 Python 3 version (currently v3.5).
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/

Package: update-notifier-common
Status: install ok installed
Priority: optional
Section: gnome
Installed-Size: 1375
Maintainer: Michael Vogt <michael.vogt@ubuntu.com>
Architecture: all
Source: update-notifier
Version: 3.168.10
Replaces: update-notifier (<< 0.75.1)
Depends: python3:any, python3-apt, python3-dbus, python3-debian, debconf, patch, update-manager-core (>= 1:16.04.6)
Pre-Depends: dpkg (>= 1.15.7.2), apt (>= 1.1~)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Suggests: policykit-1
Conffiles:
 /etc/apt/apt.conf.d/10periodic 03ddb526e156071de0667748b6ac1d33
 /etc/apt/apt.conf.d/15update-stamp b9de0ac9e2c9854b1bb213e362dc4e41
 /etc/apt/apt.conf.d/20archive 9e28a07261e6ad5ede22d5286291ca23
 /etc/apt/apt.conf.d/99update-notifier 8c8636b1123964162e9a1127f237ba7b
 /etc/cron.daily/update-notifier-common ac3a73308ace1070b9980c2bc56fb416
 /etc/cron.weekly/update-notifier-common 0cfcd026510cd5005e6eb703ccde3d73
 /etc/update-motd.d/90-updates-available 65bcef3f6859b2c2a15649e29d3654b7
 /etc/update-motd.d/98-fsck-at-reboot 16003ee8c8c80a565a98a7696cee04c0
 /etc/update-motd.d/98-reboot-required 1c4d534d0abd44d566899e47c4f22786
Description: Files shared between update-notifier and other packages
 Apt setup files and reboot notification scripts shared between
 update-notifier and other packages, notably for server use cases.

Package: libwind0-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 206
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - stringprep implementation
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: python3-cffi-backend
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 176
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-cffi
Version: 1.5.2-1ubuntu1
Replaces: python3-cffi (<< 1)
Provides: python3-cffi-backend-api-9729, python3-cffi-backend-api-max (= 10239), python3-cffi-backend-api-min (= 9729)
Depends: python3 (<< 3.6), python3 (>= 3.5~), libc6 (>= 2.14), libffi6 (>= 3.0.4)
Breaks: python3-cffi (<< 1)
Description: Foreign Function Interface for Python 3 calling C code - runtime
 Convenient and reliable way of calling C code from Python 3.
 .
 The aim of this project is to provide a convenient and reliable way of calling
 C code from Python. It keeps Python logic in Python, and minimises the C
 required. It is able to work at either the C API or ABI level, unlike most
 other approaches, that only support the ABI level.
 .
 This package contains the runtime support for pre-built cffi modules.
Homepage: http://cffi.readthedocs.org/
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 968
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1.6.5-2ubuntu0.5
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Camellia, IDEA, Salsa, CRC, MD4, MD5, RIPE-MD160, SHA-1, SHA-256, SHA-512,
 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC.
Homepage: http://directory.fsf.org/project/libgcrypt/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: sudo
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1584
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.8.16-0ubuntu1.7
Replaces: sudo-ldap
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libpam-modules
Conflicts: sudo-ldap
Conffiles:
 /etc/pam.d/sudo aa40f755f85bb33c9e79bd537e2979be
 /etc/sudoers edcf6528783ecffd3f248c8089dc298e
 /etc/sudoers.d/README 8d3cf36d1713f40a0ddc38e1b21a51b6
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.
 .
 This version is built with minimal shared library dependencies, use the
 sudo-ldap package instead if you need LDAP support for sudoers.
Homepage: http://www.sudo.ws/
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20160213-1ubuntu1
Depends: libtinfo5 (= 6.0+20160213-1ubuntu1), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: curl
Status: install ok installed
Priority: optional
Section: web
Installed-Size: 332
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 7.47.0-1ubuntu2.14
Depends: libc6 (>= 2.17), libcurl3-gnutls (= 7.47.0-1ubuntu2.14), zlib1g (>= 1:1.1.4)
Description: command line tool for transferring data with URL syntax
 curl is a command line tool for transferring data with URL syntax, supporting
 DICT, FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3,
 POP3S, RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 curl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP form
 based upload, proxies, cookies, user+password authentication (Basic, Digest,
 NTLM, Negotiate, kerberos...), file transfer resume, proxy tunneling and a
 busload of other useful tricks.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1500
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.3-14ubuntu1.4
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc d80b5c72ee089f1e43de3f084a69495c
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc 1f98b8f3f3c8f8927eca945d59dcc1c6
 /etc/skel/.profile 905f748ceda81747600e9a593b42f3e4
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: lxd
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 17115
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0.11-0ubuntu1~16.04.4
Depends: acl, adduser, dnsmasq-base, iptables, liblxc1 (>= 2.0.0~), lsb-base (>= 4.1+Debian11ubuntu7), lxd-client (= 2.0.11-0ubuntu1~16.04.4), lxcfs, netcat-openbsd, rsync, squashfs-tools, uidmap, xz-utils, debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), libacl1 (>= 2.2.51-8), libc6 (>= 2.14), libsqlite3-0 (>= 3.7.15)
Pre-Depends: debconf
Suggests: criu, lxd-tools
Conffiles:
 /etc/apparmor.d/usr.lib.lxd.lxd-bridge-proxy e05f12affea10531ad3b6fa3c5ae19c1
 /etc/init.d/lxd 62d0d414f00e08cfffe9c2f10b764772
 /etc/init/lxd.conf bd5127a3b37a5c094e04c934318ec248
 /etc/logrotate.d/lxd 312901c6c80bd878756257952fd24068
 /etc/sysctl.d/10-lxd-inotify.conf 278c217e18c2aae80d847838869e4ffd
Description: Container hypervisor based on LXC - daemon
 LXD offers a REST API to remotely manage containers over the network,
 using an image based workflow and with support for live migration.
 .
 This package contains the LXD daemon.
Built-Using: golang-1.6 (= 1.6.2-0ubuntu5~16.04.4), golang-context (= 0.0~git20140604.1.14f550f-1), golang-defaults (= 2:1.6-1ubuntu4), golang-github-gorilla-mux (= 0.0~git20150814.0.f7b6aaa-1), golang-github-gosexy-gettext (= 0~git20130221-0ubuntu6), golang-github-mattn-go-colorable (= 0.0~git20160226.9cbef7c3-1), golang-github-mattn-go-sqlite3 (= 1.1.0~dfsg1-1), golang-github-olekukonko-tablewriter (= 0.0~git20151029.0.a5eefc2-1), golang-github-pborman-uuid (= 0.0+git20150824.0.cccd189-1ubuntu1), golang-go.crypto (= 1:0.0~git20151201.0.7b85b09-2), golang-gocapability-dev (= 0.0~git20150506.1.66ef2aa-1ubuntu1), golang-gopkg-flosch-pongo2.v3 (= 3.0+git20141028.0.5e81b81-0ubuntu1), golang-gopkg-inconshreveable-log15.v2 (= 2.11+git20150921.0.b105bd3-0ubuntu1), golang-gopkg-lxc-go-lxc.v2 (= 0.0~git20161126.1.82a07a6-0ubuntu1~ubuntu16.04.1), golang-gopkg-tomb.v2 (= 0.0~git20140626.14b3d72-1), golang-goprotobuf (= 0.0~git20150526-2), golang-petname (= 2.4-0ubuntu1~16.04), golang-websocket (= 0.0~git20150811.0.b6ab76f-1), golang-yaml.v2 (= 0.0+git20160301.0.a83829b-1)
Homepage: https://linuxcontainers.org/

Package: isc-dhcp-common
Status: install ok installed
Priority: important
Section: net
Installed-Size: 149
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.3-5ubuntu12.10
Depends: debianutils (>= 2.8.2)
Description: common files used by all of the isc-dhcp packages
 This package includes all of the files that are used in common by the various
 ISC DHCP packages, such as the dhcp-eval and dhcp-options manpages and the
 OMAPI command shell.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 113
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.27.1-6ubuntu3.8
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: libsigsegv2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsigsegv
Version: 2.10-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Library for handling page faults in a portable way
 GNU libsigsegv is a library that allows handling page faults in a
 portable way. It is used e.g. for generational garbage collectors
 and stack overflow handlers.
 .
 This package contains the shared library.
Original-Maintainer: Debian Common Lisp Team <pkg-common-lisp-devel@lists.alioth.debian.org>
Homepage: http://libsigsegv.sourceforge.net/

Package: libgpm2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 83
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gpm
Version: 1.20.4-6.1
Depends: libc6 (>= 2.15)
Pre-Depends: multiarch-support
Suggests: gpm
Description: General Purpose Mouse - shared library
 This package provides a library that handles mouse requests
 and delivers them to applications. See the description for the 'gpm'
 package for more information.
Original-Maintainer: Peter Samuelson <peter@p12n.org>
Homepage: http://www.nico.schottelius.org/software/gpm/

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1745
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-11ubuntu0.2
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html
Original-Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>

Package: rename
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 68
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.20-4
Replaces: libfile-rename-perl
Provides: libfile-rename-perl
Depends: perl
Conflicts: libfile-rename-perl
Description: Perl extension for renaming multiple files
 This package provides both a perl interface for renaming files
 (File::Rename) and a command line tool 'rename' which is intended to
 replace the version currently supplied by the perl package.
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/File-Rename

Package: initramfs-tools-core
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 258
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: initramfs-tools
Version: 0.122ubuntu8.14
Replaces: initramfs-tools (<< 0.121~)
Depends: initramfs-tools-bin (= 0.122ubuntu8.14), busybox-initramfs (>= 1:1.13.3-1ubuntu5), klibc-utils (>= 2.0.4-7~), cpio, kmod | module-init-tools, udev, coreutils (>= 8.24)
Suggests: bash-completion
Breaks: initramfs-tools (<< 0.121~)
Conffiles:
 /etc/initramfs-tools/initramfs.conf 444437d425d5d06214685b7af7f86e24
Description: generic modular initramfs generator (core tools)
 This package contains the mkinitramfs program that can be used to
 create a bootable initramfs for a Linux kernel.  The initramfs should
 be loaded along with the kernel and is then responsible for mounting
 the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: libeatmydata1
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 32
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libeatmydata
Version: 105-3
Replaces: eatmydata (<< 82-1)
Depends: libc6 (>= 2.4)
Breaks: eatmydata (<< 82-1)
Description: Library and utilities to disable fsync and friends - shared library
 This package contains the actual LD_PRELOAD library (libeatmydata) supporting
 the operation of the eatmydata package. Users typically want to use or depend
 on the eatmydata package instead of this one, so see its description for
 further information.
Original-Maintainer: Mattia Rizzolo <mattia@debian.org>
Homepage: https://launchpad.net/libeatmydata

Package: libcap2-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: libcap2
Version: 1:2.24-12
Replaces: libcap-bin
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10)
Recommends: libpam-cap
Breaks: libcap-bin
Description: POSIX 1003.1e capabilities (utilities)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains additional utilities.
Original-Maintainer: Christian Kastner <ckk@debian.org>
Homepage: http://sites.google.com/site/fullycapable/

Package: libdbus-glib-1-2
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 211
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dbus-glib
Version: 0.106-1
Depends: libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libglib2.0-0 (>= 2.31.8)
Description: simple interprocess messaging system (GLib-based shared library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 This package provides a deprecated GLib-based shared library for
 applications using the GLib interface to D-Bus. New code should use
 GDBus, part of GLib, instead.
 .
 See the dbus description for more information about D-Bus in general.
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>
Homepage: http://www.freedesktop.org/wiki/Software/DBusBindings

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 547
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.5.58ubuntu2
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-2ubuntu4.1
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>

Package: lvm2
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 2117
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.02.133-1ubuntu10
Replaces: udev (<< 228-2ubuntu2)
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.110), liblvm2app2.2 (>= 2.02.133), libreadline5 (>= 5.2), libudev1 (>= 183), init-system-helpers (>= 1.18~), lsb-base, dmsetup (>> 2:1.02.47), dmeventd (>> 2:1.02.90), initscripts (>= 2.88dsf-13.3), udev (>= 228-2ubuntu2~)
Suggests: thin-provisioning-tools
Breaks: initramfs-tools (<< 0.99), thin-provisioning-tools (<< 0.3.2)
Conffiles:
 /etc/init.d/lvm2 70063dce3a90eca5ef673579e5fcc402
 /etc/init.d/lvm2-lvmetad c67e25f2c711f99b9cdaca291a143986
 /etc/init.d/lvm2-lvmpolld 6ee7740a641d91e302d3fbfe42a14942
 /etc/lvm/lvm.conf c41a1525301acb90ba1d8daf98c215b6
Description: Linux Logical Volume Manager
 This is LVM2, the rewrite of The Linux Logical Volume Manager.  LVM
 supports enterprise level volume management of disk and disk subsystems
 by grouping arbitrary disks into volume groups. The total capacity of
 volume groups can be allocated to logical volumes, which are accessed as
 regular block devices.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: libcurl3-gnutls
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 544
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: curl
Version: 7.47.0-1ubuntu2.14
Depends: libc6 (>= 2.17), libgnutls30 (>= 3.4.2), libgssapi-krb5-2 (>= 1.10+dfsg~), libidn11 (>= 1.13), libldap-2.4-2 (>= 2.4.7), libnettle6, librtmp1 (>= 2.4+20131018.git79459a2-3~), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Description: easy-to-use client-side URL transfer library (GnuTLS flavour)
 libcurl is an easy-to-use client-side URL transfer library, supporting DICT,
 FILE, FTP, FTPS, GOPHER, HTTP, HTTPS, IMAP, IMAPS, LDAP, LDAPS, POP3, POP3S,
 RTMP, RTSP, SCP, SFTP, SMTP, SMTPS, TELNET and TFTP.
 .
 libcurl supports SSL certificates, HTTP POST, HTTP PUT, FTP uploading, HTTP
 form based upload, proxies, cookies, user+password authentication (Basic,
 Digest, NTLM, Negotiate, Kerberos), file transfer resume, http proxy tunneling
 and more!
 .
 libcurl is free, thread-safe, IPv6 compatible, feature rich, well supported,
 fast, thoroughly documented and is already used by many known, big and
 successful companies and numerous applications.
 .
 SSL support is provided by GnuTLS.
Homepage: http://curl.haxx.se
Original-Maintainer: Alessandro Ghedini <ghedo@debian.org>

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 50
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.16ubuntu2
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4), lsb-base (>= 4.1+Debian11ubuntu7)
Breaks: nis (<< 3.17-30)
Conffiles:
 /etc/init/hostname.conf 2521555e6850a6ee2461a4444b4c1d0d
 /etc/init/hostname.sh.conf 5fd24ea35befe5d66bf8ff80b612e3f2
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 224
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.23-0ubuntu11
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: init
Essential: yes
Status: install ok installed
Priority: required
Section: metapackages
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: init-system-helpers
Version: 1.29ubuntu4
Depends: init-system-helpers
Pre-Depends: systemd-sysv | upstart-sysv
Description: System-V-like init utilities - metapackage
 This package is an essential metapackage which allows you to select from
 the available init systems in Ubuntu (systemd, upstart) while
 ensuring that one of these is available on the system at all times.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libklibc
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: klibc
Version: 2.0.4-8ubuntu1.16.04.4
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Homepage: https://git.kernel.org/cgit/libs/klibc/klibc.git
Original-Maintainer: maximilian attems <maks@debian.org>

Package: systemd-sysv
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 96
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 229-4ubuntu21.22
Replaces: sysvinit (<< 2.88dsf-44~), sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Pre-Depends: systemd
Conflicts: file-rc, openrc, sysvinit-core, upstart (<< 1.13.2-0ubuntu10~), upstart-sysv
Description: system and service manager - SysV links
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 This package provides the manual pages and links needed for systemd
 to replace sysvinit. Installing systemd-sysv will overwrite /sbin/init with a
 link to systemd.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libasn1-8-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 782
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.01), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - ASN.1 library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the ASN.1 parser required for Heimdal.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 197
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.3.3-17ubuntu2
Provides: awk
Pre-Depends: libc6 (>= 2.14)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 240
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6-4ubuntu1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: btrfs-tools
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 3638
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 4.4-1ubuntu1.1
Provides: btrfs-progs
Depends: e2fslibs (>= 1.42), libblkid1 (>= 2.17.2), libc6 (>= 2.8), libcomerr2 (>= 1.01), liblzo2-2, libuuid1 (>= 2.16), zlib1g (>= 1:1.2.0)
Description: Checksumming Copy on Write Filesystem utilities
 Btrfs is a new copy on write filesystem for Linux aimed at implementing
 advanced features while focusing on fault tolerance, repair and easy
 administration.
 .
 This package contains utilities (mkfs, fsck) used to work with btrfs
 and an utility (btrfs-convert) to make a btrfs filesystem from an ext3.
Homepage: http://btrfs.wiki.kernel.org/
Original-Maintainer: Dimitri John Ledkov <xnox@debian.org>

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 3226
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: groff
Version: 1.22.3-7
Replaces: groff (<< 1.20.1-6), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libstdc++6 (>= 4.1.1)
Suggests: groff
Breaks: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
 /etc/groff/man.local f2a9dfe5bc65c2c7a6d76a29d3fbe583
 /etc/groff/mdoc.local 73f8c156aab5dcb65671175ea5858854
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.
Homepage: https://www.gnu.org/software/groff/

Package: libglib2.0-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 3578
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glib2.0
Version: 2.48.2-0ubuntu4.4
Depends: libc6 (>= 2.17), libffi6 (>= 3.0.4), libpcre3, libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Pre-Depends: dpkg (>= 1.17.21)
Recommends: libglib2.0-data, shared-mime-info, xdg-user-dirs
Breaks: glib-networking (<< 2.33.12), libgnome-desktop-3-2 (<< 3.4.2-2), python-gi (<< 3.7.2)
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 431
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg
Version: 1.4.20-1ubuntu3.3
Depends: libbz2-1.0, libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: https://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libpython3.5-stdlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 9856
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.5
Version: 3.5.2-2ubuntu0~16.04.8
Depends: libpython3.5-minimal (= 3.5.2-2ubuntu0~16.04.8), mime-support, libbz2-1.0, libc6 (>= 2.15), libdb5.3, liblzma5 (>= 5.1.1alpha+20120614), libmpdec2, libncursesw5 (>= 6), libreadline6 (>= 6.0), libsqlite3-0 (>= 3.5.9), libtinfo5 (>= 6)
Breaks: libmpdec2 (<< 2.4.2)
Description: Interactive high-level object-oriented language (standard library, version 3.5)
 Python is a high-level, interactive, object-oriented language. Its 3.5 version
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.
 .
 This package contains Python 3.5's standard library. It is normally not
 used on its own, but as a dependency of python3.5.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libcap2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 46
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 1:2.24-12
Depends: libc6 (>= 2.14)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Original-Maintainer: Christian Kastner <ckk@debian.org>
Homepage: http://sites.google.com/site/fullycapable/

Package: python3-idna
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 313
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-idna
Version: 2.0-3
Depends: python3:any (>= 3.3.2-2~)
Description: Python IDNA2008 (RFC 5891) handling (Python 3)
 A library to support the Internationalised Domain Names in Applications (IDNA)
 protocol as specified in RFC 5891. This version of the protocol is often
 referred to as “IDNA2008” and can produce different results from the earlier
 standard from 2003.
 .
 The library is also intended to act as a suitable drop-in replacement for the
 “encodings.idna” module that comes with the Python standard library but
 currently only supports the older 2003 specification.
 .
 This package contains the module for Python 3.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/kjd/idna

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 227
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.27.1-6ubuntu3.8)
Version: 1:2.27.1-6ubuntu3.8
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.16), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: python3-json-pointer
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 39
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-json-pointer
Version: 1.9-3
Depends: python3, python3:any (>= 3.3.2-2~)
Description: resolve JSON pointers - Python 3.x
 Python-json-pointer is a small library to resolve JSON pointers according to
 the IETF draft specification. JSON Pointer defines a string syntax for
 identifying a specific value within a JavaScript Object Notation (JSON)
 document.
 .
 This package provides the module for Python 3.x.
Original-Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Homepage: https://github.com/stefankoegl/python-json-pointer

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 242
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 0.5.8-2.1ubuntu2
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/
Original-Maintainer: Gerrit Pape <pape@smarden.org>

Package: libfuse2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 314
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: fuse
Version: 2.9.4-1ubuntu3.1
Depends: libc6 (>= 2.17)
Suggests: fuse
Conflicts: fuse (<< 2.9.4-1ubuntu3.1)
Description: Filesystem in Userspace (library)
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
 .
 This package contains the shared library.
Homepage: http://fuse.sourceforge.net/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: python3-update-manager
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 218
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: update-manager
Version: 1:16.04.15
Replaces: update-manager-core (<< 1:0.163)
Depends: python3:any (>= 3.3.2-2~), python3-apt (>= 0.8.5~), python3-distupgrade, lsb-release
Breaks: update-manager-core (<< 1:0.163)
Description: python 3.x module for update-manager
 Python module for update-manager (UpdateManager).
 .
 This package contains the python 3.x version of this module.

Package: gcc-6-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gccgo-6
Version: 6.0.1-0ubuntu1
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libsasl2-modules-db
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.26.dfsg1-14ubuntu0.1
Replaces: libsasl2-2 (<< 2.1.26.dfsg1-2~), libsasl2-modules (<< 2.1.26.dfsg1-6~)
Depends: libc6 (>= 2.14), libdb5.3
Breaks: libsasl2-2 (<< 2.1.26.dfsg1-2~)
Description: Cyrus SASL - pluggable authentication modules (DB)
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the DB plugin, which supports Berkeley DB lookups.
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Homepage: http://www.cyrusimap.org/

Package: cloud-initramfs-copymods
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 24
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.27ubuntu1.6
Depends: initramfs-tools
Description: copy initramfs modules into root filesystem for later use
 When booting with an external-to-root kernel and initramfs, you need
 to ensure that /lib/modules contains any necessary modules not already
 loaded.
 .
 This package arranges for the modules in the initramfs to be placed
 into /lib/modules after the switchroot is done.
Homepage: http://launchpad.net/cloud-initramfs-tools

Package: linux-base
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 4.5ubuntu1~16.04.1
Depends: debconf (>= 0.5) | debconf-2.0
Description: Linux image base package
 This package contains files and support scripts for all Linux
 images.
Original-Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>

Package: python3-six
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 53
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: all
Multi-Arch: foreign
Source: six
Version: 1.10.0-3
Depends: python3:any (>= 3.4~)
Description: Python 2 and 3 compatibility library (Python 3 interface)
 Six is a Python 2 and 3 compatibility library. It provides utility
 functions for smoothing over the differences between the Python versions
 with the goal of writing Python code that is compatible on both Python
 versions.
 .
 This package provides Six on the Python 3 module path. It is complemented
 by python-six and pypy-six.
Homepage: https://pythonhosted.org/six/

Package: libxtables11
Status: install ok installed
Priority: important
Section: net
Installed-Size: 97
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: iptables
Version: 1.6.0-2ubuntu3
Replaces: iptables (<< 1.4.16.3-3)
Depends: libc6 (>= 2.14)
Breaks: iptables (<< 1.4.16.3-3)
Description: netfilter xtables library
 The user-space interface to the Netfilter xtables kernel framework.
Homepage: http://www.netfilter.org/
Original-Maintainer: iptables devel team <pkg-netfilter-devel@lists.alioth.debian.org>

Package: gnupg
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1680
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.4.20-1ubuntu3.3
Depends: gpgv, libbz2-1.0, libc6 (>= 2.15), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4)
Suggests: gnupg-curl, gnupg-doc, libpcsclite1, parcimonie, xloadimage | imagemagick | eog
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
Homepage: https://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 411
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.27.1-6ubuntu3.8
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.25), libsmartcols1 (>= 2.27~rc1), libudev1 (>= 183)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: libhcrypto4-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 256
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libroken18-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - crypto library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the cryptographic library required for Heimdal.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libgnutls30
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1468
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gnutls28
Version: 3.4.10-4ubuntu1.5
Depends: libc6 (>= 2.17), libgmp10 (>= 2:6), libhogweed4, libidn11 (>= 1.13), libnettle6, libp11-kit0 (>= 0.23.1), libtasn1-6 (>= 4.5), zlib1g (>= 1:1.1.4)
Suggests: gnutls-bin
Conflicts: libhogweed2, libnettle4
Description: GNU TLS library - main runtime library
 GnuTLS is a portable library which implements the Transport Layer
 Security (TLS 1.0, 1.1, 1.2) and Secure Sockets Layer (SSL) 3.0 and Datagram
 Transport Layer Security (DTLS 1.0, 1.2) protocols.
 .
 GnuTLS features support for:
  - TLS extensions: server name indication, max record size, opaque PRF
    input, etc.
  - authentication using the SRP protocol.
  - authentication using both X.509 certificates and OpenPGP keys.
  - TLS Pre-Shared-Keys (PSK) extension.
  - Inner Application (TLS/IA) extension.
  - X.509 and OpenPGP certificate handling.
  - X.509 Proxy Certificates (RFC 3820).
  - all the strong encryption algorithms (including SHA-256/384/512 and
    Camellia (RFC 4132)).
 .
 This package contains the main runtime library.
Homepage: http://www.gnutls.org/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: libsasl2-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 147
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.26.dfsg1-14ubuntu0.1
Replaces: libsasl2
Depends: libc6 (>= 2.15), libsasl2-modules-db (>= 2.1.26.dfsg1-14ubuntu0.1)
Recommends: libsasl2-modules (>= 2.1.26.dfsg1-14ubuntu0.1)
Breaks: postfix (<= 2.8.3-1), slapd (<= 2.4.25-3)
Description: Cyrus SASL - authentication abstraction library
 This is the Cyrus SASL API implementation, version 2.1.
 .
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT or Heimdal
 Kerberos 5), NTLM, OTP, PLAIN, or LOGIN can be used.
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Homepage: http://www.cyrusimap.org/

Package: dns-root-data
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 17
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2018013001~16.04.1
Description: DNS root data including root zone and DNSSEC key
 This package contains various root zone related data as published
 by IANA to be used by various DNS software as a common source
 of DNS root zone data, namely:
 .
  * Root Hints (root.hints)
  * Root Trust Anchors (root.key, root.ds)
Original-Maintainer: dns-root-data packagers <dns-root-data@packages.debian.org>
Homepage: https://data.iana.org/root-anchors/

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 621
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 229-4ubuntu21.22
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32)
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libdns-export162
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1936
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: bind9
Version: 1:9.10.3.dfsg.P4-8ubuntu1.15
Depends: libc6 (>= 2.14), libisc-export160
Description: Exported DNS Shared Library
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the exported libdns shared library.
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10953
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.23-0ubuntu11
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.23), locales-all (<< 2.23), lsb-core (<= 3.2-27), nscd (<< 2.23)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: apparmor
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 1651
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.10.95-0ubuntu2.11
Replaces: apparmor-parser, apparmor-utils (<< 2.8.0-0ubuntu28), libapache2-mod-apparmor (<< 2.5.1-0ubuntu3)
Depends: libc6 (>= 2.17), debconf (>= 0.5) | debconf-2.0, lsb-base (>= 4.1+Debian11ubuntu7), python3:any, libapparmor-perl, debconf
Suggests: apparmor-profiles, apparmor-profiles-extra, apparmor-docs, apparmor-utils
Breaks: apparmor-easyprof-ubuntu (<< 1.2.22), apparmor-utils (<< 2.8.0-0ubuntu28), libapache2-mod-apparmor (<< 2.5.1-0ubuntu3), libvirt-bin (<< 1.2.6-0ubuntu6~), lightdm (<< 1.11.8-0ubuntu2~), lxc (<< 1.1.0~alpha1-0ubuntu5~), rsyslog (<< 7.4.4-1ubuntu9~)
Conffiles:
 /etc/apparmor.d/abstractions/X c46cb626d9466bf8cf082d84032ff4e9
 /etc/apparmor.d/abstractions/apache2-common 009189f793ba7caa55befe9a613dce98
 /etc/apparmor.d/abstractions/apparmor_api/change_profile 9f4c0a621f4939af15588b7fe670dfe7
 /etc/apparmor.d/abstractions/apparmor_api/examine f3b118b0344df2bcf4d18b81b45536bd
 /etc/apparmor.d/abstractions/apparmor_api/find_mountpoint cf9e6513e00b441c0e3fbaf57b5c5110
 /etc/apparmor.d/abstractions/apparmor_api/introspect 4c345c7e02de097f250c3ab12a442bed
 /etc/apparmor.d/abstractions/apparmor_api/is_enabled d98f1c1f3f41075007943f3ef072bd99
 /etc/apparmor.d/abstractions/aspell fdcbf54106fd1ee376d4ade77e720488
 /etc/apparmor.d/abstractions/audio 71e2298f55bd94030785030d5146da8b
 /etc/apparmor.d/abstractions/authentication 04cf81938b39380d97f675e9e3d28824
 /etc/apparmor.d/abstractions/base 9e71ef39948a97946fe134aa7d6f7d24
 /etc/apparmor.d/abstractions/bash 4a5f51dc0fe10de2eba86b22351ae092
 /etc/apparmor.d/abstractions/consoles c7e6e00c4845e9afb877359691946386
 /etc/apparmor.d/abstractions/cups-client ea86b52242df406f0bc955039f990006
 /etc/apparmor.d/abstractions/dbus db5bb2211ee5ecf1d2d4eb72c0e52617
 /etc/apparmor.d/abstractions/dbus-accessibility 1a9829023057d91f2f709b49ded37c87
 /etc/apparmor.d/abstractions/dbus-accessibility-strict 0e07c997566b1d71b9287c0a3dcb1292
 /etc/apparmor.d/abstractions/dbus-session e9dabe52be01410c4e4c9a9e8ef9779d
 /etc/apparmor.d/abstractions/dbus-session-strict edc118f0a97fa3e07e54363b1e54ee89
 /etc/apparmor.d/abstractions/dbus-strict d2a901e0369ab95a244828e2d296276e
 /etc/apparmor.d/abstractions/dconf 02249fe91402fccef01161a61c557098
 /etc/apparmor.d/abstractions/dovecot-common 76f2f15c26a2a4f4ebe621848c696dcf
 /etc/apparmor.d/abstractions/enchant a1ac9629b466be8a41cb5f87757f3363
 /etc/apparmor.d/abstractions/fonts 47c02fe989eb038da1632b83368c311f
 /etc/apparmor.d/abstractions/freedesktop.org 921ce3f15e70f1c7783fd01dbaa1eaef
 /etc/apparmor.d/abstractions/gnome 730b4d2c31ef9d301707413616a357d8
 /etc/apparmor.d/abstractions/gnupg b474d47c024a62a221c174bb0fe0df86
 /etc/apparmor.d/abstractions/ibus 3e70b36c4931993a0a37d50fa6ddc1ec
 /etc/apparmor.d/abstractions/kde c51da7a01bb8eaa94410a6394c2d05c3
 /etc/apparmor.d/abstractions/kerberosclient 165918f6f7a43c7f8026ff330500a1ba
 /etc/apparmor.d/abstractions/launchpad-integration 08239d10ba383041e97bc7f3962eb788
 /etc/apparmor.d/abstractions/ldapclient f6d4bac77e72abbace3805ad95dc5fad
 /etc/apparmor.d/abstractions/likewise eda6f01c5c1f1f09bc85a7f3a1d3ebaf
 /etc/apparmor.d/abstractions/mdns d4959c984a530f8c682e31f34927d57e
 /etc/apparmor.d/abstractions/mir d40c45b5284efa1e7aa8e473bf3eaa63
 /etc/apparmor.d/abstractions/mysql be34db29008a5c06387c6928b0536ecc
 /etc/apparmor.d/abstractions/nameservice d7ea5217f3cc9f66e76801729dd7d376
 /etc/apparmor.d/abstractions/nis b2a829a4e26dd3ae92ec2f67536edc20
 /etc/apparmor.d/abstractions/nvidia 42fd0fc664dd05c72500af4c19f7e139
 /etc/apparmor.d/abstractions/openssl 774ca398a166520a1cdb84d8b8a7b7dc
 /etc/apparmor.d/abstractions/orbit2 98b6459f02e5c68e6ef83dced628ea5f
 /etc/apparmor.d/abstractions/p11-kit dc059947c11d3f353c380ca7547390ce
 /etc/apparmor.d/abstractions/perl 8782e5a0f17bc4358f7d942e1fabe0d0
 /etc/apparmor.d/abstractions/php5 7fbf118e06459bf3a7139bc6b874356a
 /etc/apparmor.d/abstractions/postfix-common 87a8072326d45338294cdf3e856b118f
 /etc/apparmor.d/abstractions/private-files f2220f8a54fee55e89ec68b11bee8bfd
 /etc/apparmor.d/abstractions/private-files-strict a78752cbf27bf539e256b592d522a9fd
 /etc/apparmor.d/abstractions/python 31d5b596bfc8fdb67f63559c2c53debe
 /etc/apparmor.d/abstractions/ruby 2747c396fa14819b92683e23e8f5a889
 /etc/apparmor.d/abstractions/samba 33ad68ec92559566333ddb0b04619d4f
 /etc/apparmor.d/abstractions/smbpass b4d3be08dff2a9e3b4f1a18ddb65c63c
 /etc/apparmor.d/abstractions/ssl_certs fc67615adb905942aee5ed49fd4e80f0
 /etc/apparmor.d/abstractions/ssl_keys 2bff85dbd2face2b968226c9f06aec15
 /etc/apparmor.d/abstractions/svn-repositories 8bc8a123d9ce516c53b818b8a4fc0ed1
 /etc/apparmor.d/abstractions/ubuntu-bittorrent-clients 1398edfc93d57694774bcad9b83e6764
 /etc/apparmor.d/abstractions/ubuntu-browsers e0a76cb12824b7dc06f89dc8197145e5
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/java 1c4b525f5475ff12fc143b70b11f8ec8
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/kde 15541761a5dbdc5ccd12e85e2afe4094
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/mailto e60b3e4611a14d835d8b6fe0ffe27fc2
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/multimedia deb211c8ea1b988b776ade271cc8d560
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/plugins-common 07e327f4e32e2333db1f609c87831b65
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/productivity dd54584ceece9aa1ee9c3c71418cd9ae
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/text-editors 006c96f21261b0c15e2f453527136973
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration a3146cbc94bc1d8172fa09135fb82d7c
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/ubuntu-integration-xul a6d33002626e1d9a81a490e2f61509fa
 /etc/apparmor.d/abstractions/ubuntu-browsers.d/user-files 3e31dcbbf3c77dc50d31245357ad2c4c
 /etc/apparmor.d/abstractions/ubuntu-console-browsers d560f0509cdc8ffcdfa1dc115eee88f1
 /etc/apparmor.d/abstractions/ubuntu-console-email 1ebfacc8ac5cfba7f3d59baceae52af8
 /etc/apparmor.d/abstractions/ubuntu-email de645eaa2d4505105dc999b16612025b
 /etc/apparmor.d/abstractions/ubuntu-feed-readers b8eb233df01672f4941357487b39cda9
 /etc/apparmor.d/abstractions/ubuntu-gnome-terminal 886de107666e17033b11aa3abb1ce054
 /etc/apparmor.d/abstractions/ubuntu-helpers bc1609bcbcabd5327395c680207197c4
 /etc/apparmor.d/abstractions/ubuntu-konsole 2ba4958d99c66160f118b5cda90b26c7
 /etc/apparmor.d/abstractions/ubuntu-media-players ff25e51b62d2bf5146134ae3c6530c6b
 /etc/apparmor.d/abstractions/ubuntu-unity7-base 9adb20c938466802c326a75667d06a3f
 /etc/apparmor.d/abstractions/ubuntu-unity7-launcher 96f03042c5465f46ddadf15691507414
 /etc/apparmor.d/abstractions/ubuntu-unity7-messaging 4b9196db0bc697cb80f7e211edc78ae0
 /etc/apparmor.d/abstractions/ubuntu-xterm bef5766269999b9e73ad6e11dd7930bd
 /etc/apparmor.d/abstractions/user-download d25d5d0d9b13ae8637dc64d2bc217142
 /etc/apparmor.d/abstractions/user-mail 11b19d8363d218b0fe6afb231dc2677e
 /etc/apparmor.d/abstractions/user-manpages c59f25e289e9a426807ab5830136aa42
 /etc/apparmor.d/abstractions/user-tmp 93247b3296a7f0bff353eb9ee11fba06
 /etc/apparmor.d/abstractions/user-write d631f64d8f109365f2457255161551fd
 /etc/apparmor.d/abstractions/video 2194baba2007ea20698441bc333f9446
 /etc/apparmor.d/abstractions/web-data 36eb024800c81ef69733027f1a27a907
 /etc/apparmor.d/abstractions/winbind 3b37bfd8193e84c6d08809750346e7c1
 /etc/apparmor.d/abstractions/wutmp 3cb05ef8e125c7c3edf00a505dd9e68f
 /etc/apparmor.d/abstractions/xad 0b2fdc7be71e977e240d77338f414ec7
 /etc/apparmor.d/abstractions/xdg-desktop d891f70210acc01e42c525012a1c3fc6
 /etc/apparmor.d/local/README b2c6b40577b4099c584cdf731f5aeb0b
 /etc/apparmor.d/tunables/alias 45dca5dd72a6c862d27caa936e6c00ad
 /etc/apparmor.d/tunables/apparmorfs 5797c1a5b267c3f51d983ab8daf8f587
 /etc/apparmor.d/tunables/dovecot 1b0d5ec63a9c87387142bdb2c94e7ede
 /etc/apparmor.d/tunables/global 9bfa12c972f13c06aeff3e7b59c65b89
 /etc/apparmor.d/tunables/home ec0b11e815b30dc6fbf4d05a41aff9f5
 /etc/apparmor.d/tunables/kernelvars e40785bf1c0ef9d0ee466672d7ce2177
 /etc/apparmor.d/tunables/multiarch 6ebecd63690d4a53f3e7ff6ae48941ca
 /etc/apparmor.d/tunables/proc ffaa055ceb36031c973ffaece22a5fc0
 /etc/apparmor.d/tunables/securityfs bb3695a39a1bb8a5399f76b95bacc40f
 /etc/apparmor.d/tunables/sys ba0699f2f961179a3352cb3de3e9f586
 /etc/apparmor.d/tunables/xdg-user-dirs 602eaa969d2dfa00a0ec16eed9b60b7f
 /etc/apparmor/parser.conf 8fed7a9ec65d4f695e2aa14faf261c8b
 /etc/apparmor/subdomain.conf df4dade439e2786fd1d227c99164563d
 /etc/init.d/apparmor 4b8215b1ac497715a6e0c0223d23f9cb
 /etc/init/apparmor.conf b327a6d6dd2d2c2fe47e1c387c225e31
Description: user-space parser utility for AppArmor
 This provides the system initialization scripts needed to use the
 AppArmor Mandatory Access Control system, including the AppArmor Parser
 which is required to convert AppArmor text profiles into machine-readable
 policies that are loaded into the kernel for use with the AppArmor Linux
 Security Module.
Homepage: http://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>

Package: distro-info-data
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 16
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.28ubuntu0.12
Replaces: distro-info (<< 0.3~)
Breaks: distro-info (<< 0.14ubuntu0.1~), juju-2.0 (<< 2.2.6)
Description: information about the distributions' releases (data files)
 Information about all releases of Debian and Ubuntu. The distro-info script
 will give you the codename for e.g. the latest stable release of your
 distribution. To get information about a specific distribution there are the
 debian-distro-info and the ubuntu-distro-info scripts.
 .
 This package contains the data files.
Original-Maintainer: Benjamin Drung <bdrung@debian.org>

Package: gettext-base
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: gettext
Version: 0.19.7-2ubuntu3.1
Depends: libc6 (>= 2.14), libasprintf0v5 (>= 0.18.1.1-6)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.
Homepage: http://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 449
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.27.1-6ubuntu3.8
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: libroken18-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 138
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libc6 (>= 2.16)
Description: Heimdal Kerberos - roken support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the library for roken support.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: initramfs-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 125
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.122ubuntu8.14
Provides: linux-initramfs-tool
Depends: initramfs-tools-core (= 0.122ubuntu8.14), linux-base
Suggests: bash-completion
Breaks: console-setup (<< 1.72), cryptsetup (<< 2:1.6.6-4~), elilo (<< 3.12-3.1~), initscripts (<< 2.88dsf-59.3~), isc-dhcp-client (= 4.3.3-5ubuntu13), lilo (<< 22.8-8.2~), lvm2 (<< 2.02.111-2.1~), mountall (<< 2.0~), nplan (<< 0.32~16.04.5), s390-tools (<< 1.8.3-2~), systemd-sysv (<< 186)
Conflicts: linux-initramfs-tool, usplash (<< 0.5.50)
Conffiles:
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/kernel/postinst.d/initramfs-tools 1d77d3e4b57c3da299aacd44b1dc207c
 /etc/kernel/postrm.d/initramfs-tools f57d0b03f79fd46dd1a1fa3b00206070
Description: generic modular initramfs generator (automation)
 This package builds a bootable initramfs for Linux kernel packages.  The
 initramfs is loaded along with the kernel and is responsible for
 mounting the root filesystem and starting the main init system.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: libpcre3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 655
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.38-3.1
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.
Original-Maintainer: Matthew Vernon <matthew@debian.org>

Package: librtmp1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 131
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: rtmpdump
Version: 2.4+20151223.gitfa8646d-1ubuntu0.1
Depends: libc6 (>= 2.14), libgmp10, libgnutls30 (>= 3.4.2), libhogweed4, libnettle6, zlib1g (>= 1:1.1.4)
Description: toolkit for RTMP streams (shared library)
 A small dumper for media content streamed over the RTMP protocol (like BBC's
 iPlayer high quality streams). Supplying an RTMP URL will result in a dumped
 flv file, which can be played/transcoded with standard tools.
 .
 This package contains the shared libraries, header files needed by
 programs that want to use librtmp.
Homepage: http://rtmpdump.mplayerhq.hu/
Original-Maintainer: Debian Multimedia Maintainers <pkg-multimedia-maintainers@lists.alioth.debian.org>

Package: libdevmapper1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 425
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.133-1ubuntu10)
Version: 2:1.02.110-1ubuntu10
Depends: libc6 (>= 2.22), libselinux1 (>= 1.32), libudev1 (>= 183)
Recommends: dmsetup (>= 2:1.02.110-1ubuntu10)
Breaks: liblvm2app2.2 (<< 2.02.122), lvm2 (<< 2.02.122)
Conflicts: libdevmapper1.02
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the (user-space) shared library for accessing the
 device-mapper; it allows usage of the device-mapper through a clean,
 consistent interface (as opposed to through kernel ioctls).
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: python3-pkg-resources
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 412
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-setuptools
Version: 20.7.0-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python3-setuptools
Description: Package Discovery and Resource Access using pkg_resources
 The pkg_resources module provides an API for Python libraries to
 access their resource files, and for extensible applications and
 frameworks to automatically discover plugins.  It also provides
 runtime support for using C extensions that are inside zipfile-format
 eggs, support for merging packages that have separately-distributed
 modules or subpackages, and APIs for managing Python's current
 "working set" of active packages.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: https://pypi.python.org/pypi/setuptools

Package: ubuntu-release-upgrader-core
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 340
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:16.04.26
Replaces: update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Depends: python3:any (>= 3.2~), python3-distupgrade (= 1:16.04.26)
Recommends: libpam-modules (>= 1.0.1-9ubuntu3)
Breaks: software-properties (<< 0.9.27), update-manager (<< 1:0.165), update-manager-core (<< 1:0.165)
Conffiles:
 /etc/update-manager/meta-release 834e015e99673a6e3b0f31f6a511355f
 /etc/update-manager/release-upgrades df41b4619e6054b4558a75e316923611
 /etc/update-motd.d/91-release-upgrade 51540d8467fcf35f65e2873454746e54
Description: manage release upgrades
 This is the core of the Ubuntu Release Upgrader

Package: bcache-tools
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 139
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.8-2
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), libuuid1 (>= 2.16)
Recommends: initramfs-tools | linux-initramfs-tool
Description: bcache userspace tools
 Bcache allows the use of SSDs to cache other block devices.
 .
 Documentation for the run-time interface is included in the kernel tree; in
 Documentation/bcache.txt.
 .
 This package includes udev rules, initramfs support, and the utilities to
 create a new bcache as well as inspect existing bcache partitions.
Original-Maintainer: David Mohr <david@mcbf.net>
Homepage: http://bcache.evilpiepirate.org/

Package: cloud-initramfs-dyn-netconf
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 30
Maintainer: Scott Moser <smoser@ubuntu.com>
Architecture: all
Source: cloud-initramfs-tools
Version: 0.27ubuntu1.6
Depends: initramfs-tools
Description: write a network interface file in /run for BOOTIF
 This package provides an initramfs module that will write a simple
 network interfaces formated file to /run/network/interfaces with
 entries for any devices that were configured during initramfs.
Homepage: http://launchpad.net/cloud-initramfs-tools

Package: libperl5.22
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 20359
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: perl
Version: 5.22.1-9ubuntu0.6
Replaces: libarchive-tar-perl (<= 1.38-2), libcompress-raw-bzip2-perl (<< 2.068), libcompress-raw-zlib-perl (<< 2.068), libcompress-zlib-perl (<< 2.068), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95), libencode-perl (<< 2.77), libio-compress-base-perl (<< 2.068), libio-compress-bzip2-perl (<< 2.068), libio-compress-perl (<< 2.068), libio-compress-zlib-perl (<< 2.068), libmime-base64-perl (<< 3.15), libmodule-corelist-perl (<< 2.14-2), libstorable-perl (<< 2.53.01), libsys-syslog-perl (<< 0.33), libthreads-perl (<< 2.01), libthreads-shared-perl (<< 1.48), libtime-hires-perl (<< 1.9726), libtime-piece-perl (<< 1.29), perl (<< 5.22.0~), perl-base (<< 5.22.0~)
Provides: libcompress-raw-bzip2-perl, libcompress-raw-zlib-perl, libcompress-zlib-perl, libdigest-md5-perl, libdigest-sha-perl, libencode-perl, libio-compress-base-perl, libio-compress-bzip2-perl, libio-compress-perl, libio-compress-zlib-perl, libmime-base64-perl, libstorable-perl, libsys-syslog-perl, libthreads-perl, libthreads-shared-perl, libtime-hires-perl, libtime-piece-perl, perl-cross-config
Depends: libbz2-1.0, libc6 (>= 2.23), libdb5.3, libgdbm3 (>= 1.8.3), zlib1g (>= 1:1.2.2.3), perl-modules-5.22 (>= 5.22.1-9ubuntu0.6)
Breaks: dh-make-perl (<< 0.73-1), ftpmirror (<< 1.96+dfsg-13), libcompress-raw-bzip2-perl (<< 2.068), libcompress-raw-zlib-perl (<< 2.068), libcompress-zlib-perl (<< 2.068), libdigest-md5-perl (<< 2.54), libdigest-sha-perl (<< 5.95), libencode-perl (<< 2.77), libhtml-template-compiled-perl (<< 0.95-1), libio-compress-base-perl (<< 2.068), libio-compress-bzip2-perl (<< 2.068), libio-compress-perl (<< 2.068), libio-compress-zlib-perl (<< 2.068), libload-perl (<< 0.20-1), libmime-base64-perl (<< 3.15), libnet-jifty-perl (<< 0.14-1), libperl-apireference-perl (<< 0.09-1), libregexp-optimizer-perl (<< 0.15-3), libsoap-lite-perl (<< 0.712-4), libstorable-perl (<< 2.53.01), libsys-syslog-perl (<< 0.33), libthreads-perl (<< 2.01), libthreads-shared-perl (<< 1.48), libtime-hires-perl (<< 1.9726), libtime-piece-perl (<< 1.29), libxml-parser-lite-tree-perl (<< 0.14-1), libyaml-perl (<< 0.73-1), mrtg (<< 2.16.3-3.1)
Description: shared Perl library
 This package contains the shared Perl library, used by applications
 which embed a Perl interpreter.
 .
 It also contains the architecture-dependent parts of the standard
 library (and depends on perl-modules-5.22 which contains the
 architecture-independent parts).
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: python3-gi
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 635
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: pygobject
Version: 3.20.0-0ubuntu1
Depends: python3 (<< 3.6), python3 (>= 3.5~), libc6 (>= 2.14), libffi6 (>= 3.0.4), libgirepository-1.0-1 (>= 1.44.0), libglib2.0-0 (>= 2.41.1), gir1.2-glib-2.0 (>= 1.39.0)
Description: Python 3 bindings for gobject-introspection libraries
 GObject is an abstraction layer that allows programming with an object
 paradigm that is compatible with many languages. It is a part of Glib,
 the core library used to build GTK+ and GNOME.
 .
 This package contains the Python 3 binding generator for libraries that
 support gobject-introspection, i. e. which ship a gir1.2-<name>-<version>
 package. With these packages, the libraries can be used from Python 3.
Original-Maintainer: Josselin Mouette <joss@debian.org>
Homepage: https://wiki.gnome.org/Projects/PyGObject

Package: lsb-release
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20160110ubuntu0.2
Depends: python3:any (>= 3.4~), distro-info-data
Recommends: apt
Suggests: lsb
Description: Linux Standard Base version reporting utility
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 The lsb-release command is a simple tool to help identify the Linux
 distribution being used and its compliance with the Linux Standard Base.
 LSB conformance will not be reported unless the required metapackages are
 installed.
 .
 While it is intended for use by LSB packages, this command may also
 be useful for programmatically distinguishing between a pure Debian
 installation and derived distributions.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb
Original-Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 6248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 8.25-2ubuntu3~16.04
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: python3-apport
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 541
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: apport
Version: 2.20.1-0ubuntu2.19
Depends: python3:any (>= 3.3.2-2~), python3-apt (>= 0.7.9), python3-problem-report (>= 0.94), lsb-release
Recommends: apport
Suggests: python3-launchpadlib
Description: Python 3 library for Apport crash report handling
 This Python package provides high-level functions for creating and
 handling apport crash reports:
 .
  * Query available and new reports.
  * Add OS, packaging, and process runtime information to a report.
  * Various frontend utility functions.
  * Python hook to generate crash reports when Python scripts fail.
Homepage: https://wiki.ubuntu.com/Apport

Package: at
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 150
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1.18-2ubuntu1
Depends: libpam-runtime (>= 1.0.1-11), lsb-base (>= 3.2-14), init-system-helpers (>= 1.18~), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.1.9)
Suggests: default-mta | mail-transport-agent
Conffiles:
 /etc/at.deny 8cb7e7632119dc26115436938efd2522
 /etc/init.d/atd ce2de503acc3de02f544571e89d4d717
 /etc/pam.d/atd 270e45e6984c092c9986b17dbb04378a
Description: Delayed job execution and batch processing
 At and batch read shell commands from standard input
 storing them as a job to be scheduled for execution in the
 future.
 .
 Use
  at    to run the job at a specified time
  batch to run the job when system load levels permit
Original-Maintainer: Jose M Calhariz <jose@calhariz.com>

Package: gawk
Status: install ok installed
Priority: optional
Section: interpreters
Installed-Size: 1516
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1:4.1.3+dfsg-0.1
Provides: awk
Pre-Depends: libc6 (>= 2.15), libgmp10, libmpfr4 (>= 3.1.3), libreadline6 (>= 6.0), libsigsegv2 (>= 2.9)
Suggests: gawk-doc
Description: GNU awk, a pattern scanning and processing language
 `awk', a program that you can use to select particular records in a
 file and perform operations upon them.
 .
 Gawk is the GNU Project's implementation of the AWK programming language.
 It conforms to the definition of the language in the POSIX 1003.2 Command
 Language And Utilities Standard. This version in turn is based on the
 description in The AWK Programming Language, by Aho, Kernighan, and
 Weinberger, with the additional features defined in the System V Release
 4 version of UNIX awk. Gawk also provides more recent Bell Labs awk
 extensions, and some GNU-specific extensions.
Original-Maintainer: Arthur Loiret <aloiret@debian.org>
Homepage: http://www.gnu.org/software/gawk/

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1487
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.3.0-1ubuntu3.16.04.5
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables11
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos c0fc5315e2dd3c6b50f19da3678bce80
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos a4f97323f29caf9faf49596aea11d91a
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2
Original-Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>

Package: tcpd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: tcp-wrappers
Version: 7.6.q-25
Replaces: libwrap0 (<< 7.6-8)
Depends: libc6 (>= 2.4), libwrap0 (>= 7.6-4~)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: uidmap
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 328
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: shadow
Version: 1:4.2-3.1ubuntu5.4
Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: programs to help use subuids
 These programs help unprivileged users to create uid and gid mappings in
 user namespaces.
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: libbsd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libbsd
Version: 0.8.2-1
Depends: libc6 (>= 2.17)
Description: utility functions from BSD systems - shared library
 This library provides some C functions such as strlcpy() that are commonly
 available on BSD systems but not on others like GNU systems.
 .
 For a detailed list of the provided functions, please see the libbsd-dev
 package description.
Original-Maintainer: Guillem Jover <guillem@debian.org>
Homepage: http://libbsd.freedesktop.org/

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 3020
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.42.13-1ubuntu1
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.42.13-1ubuntu1), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf f3de4385c498ee9e01d1d703f0c3795d
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libpng12-0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 278
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libpng
Version: 1.2.54-1ubuntu1.1
Replaces: libpng12-dev (<= 1.2.8rel-7)
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Conflicts: libpng12-dev (<= 1.2.8rel-7), mzscheme (<= 1:209-5), pngcrush (<= 1.5.10-2), pngmeta (<= 1.11-3), povray-3.5 (<= 3.5.0c-10), qemacs (<= 0.3.1-5)
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 804
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.28-2.1ubuntu0.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libkrb5support0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 150
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.13.2+dfsg-5ubuntu2.1
Depends: libc6 (>= 2.14)
Breaks: libgssapi-krb5-2 (<< 1.13~alpha1-1), libk5crypto3 (<< 1.13~alpha1-1), libkadm5clnt-mit9 (<< 1.13~alpha1-1), libkadm5srv-mit9 (<< 1.13~alpha1-1), libkdb5-7 (<< 1.13~alpha1-1)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries - Support library
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains an internal runtime support library used by other
 Kerberos libraries.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: open-iscsi
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 2039
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0.873+git0.3b4b4500-14ubuntu3.7
Depends: libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), udev
Pre-Depends: debconf | debconf-2.0
Recommends: busybox-initramfs
Conffiles:
 /etc/default/open-iscsi 5744c65409cbdea2bcf5b99dbff89e96
 /etc/init.d/iscsid f45c4e0127bafee72454ce97a7ce2f6c
 /etc/init.d/open-iscsi b0cdf36373e443ad1e4171959dc8046f
 /etc/iscsi/iscsid.conf f156fdcd48f575760452f8d72ad8546a
Description: iSCSI initiator tools
 Open-iSCSI is a high-performance, transport independent, multi-platform
 implementation of the RFC3720 Internet Small Computer Systems Interface
 (iSCSI).
 .
 Open-iSCSI is partitioned into user and kernel parts, where the kernel
 portion implements the iSCSI data path (i.e. iSCSI Read and iSCSI Write).
 The userspace contains the entire control plane:
  * Configuration Manager;
  * iSCSI Discovery;
  * Login and Logout processing;
  * Connection level error processing;
  * Nop-In and Nop-Out handling;
  * (in the future) Text processing, iSNS, SLP, Radius, etc.
 .
 This package includes a daemon, iscsid, and a management utility,
 iscsiadm.
Homepage: http://www.open-iscsi.org/
Original-Maintainer: Debian iSCSI Maintainers <pkg-iscsi-maintainers@lists.alioth.debian.org>

Package: libhx509-5-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 352
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libcomerr2 (>= 1.34), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimbase1-heimdal (>= 1.6~git20131117), libroken18-heimdal (>= 1.7~git20150920), libwind0-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - X509 support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 90
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8ubuntu0.2
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: mdadm
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.3-2ubuntu7.6
Replaces: mdctl
Depends: libc6 (>= 2.15), debconf (>= 1.4.72), lsb-base (>= 3.1-6), udev (>= 204), util-linux (>= 2.15-1), initscripts (>= 2.88dsf-13.3)
Recommends: kmod | module-init-tools
Suggests: default-mta | mail-transport-agent, dracut-core
Breaks: dmraid (<= 1.0.0.rc16-4.2ubuntu1), mdctl (<< 0.7.2), raidtools2 (<< 1.00.3-12.1), udev (<< 136-1)
Conffiles:
 /etc/cron.d/mdadm e2384a232bdaaf9ec65173d5282e40fe
 /etc/cron.daily/mdadm 04839987aec89ae101d5e1f47abd2be4
 /etc/init.d/mdadm 121d4cc762f2b02a59881deec676d47d
 /etc/init.d/mdadm-waitidle ff8f134084409dbbf70d6fff2d35f729
 /etc/logcheck/ignore.d.server/mdadm 5eeaf5c5c7dc0291a986e43004dfd495
 /etc/logcheck/violations.d/mdadm efd87cec251921ce0642171eae5f3b73
Description: tool to administer Linux MD arrays (software RAID)
 The mdadm utility can be used to create, manage, and monitor MD
 (multi-disk) arrays for software RAID or multipath I/O.
 .
 This package automatically configures mdadm to assemble arrays during the
 system startup process. If not needed, this functionality can be disabled.
Homepage: http://neil.brown.name/blog/mdadm
Original-Maintainer: Debian mdadm maintainers <pkg-mdadm-devel@lists.alioth.debian.org>

Package: ucf
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 191
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.0036
Depends: debconf (>= 1.5.19), coreutils (>= 5.91)
Conffiles:
 /etc/ucf.conf 5565b8b26108c49ba575ba452cd69b3e
Description: Update Configuration File(s): preserve user changes to config files
 Debian policy mandates that user changes to configuration files must be
 preserved during package upgrades. The easy way to achieve this behavior
 is to make the configuration file a 'conffile', in which case dpkg
 handles the file specially during upgrades, prompting the user as
 needed.
 .
 This is appropriate only if it is possible to distribute a default
 version that will work for most installations, although some system
 administrators may choose to modify it. This implies that the
 default version will be part of the package distribution, and must
 not be modified by the maintainer scripts during installation (or at
 any other time).
 .
 This script attempts to provide conffile-like handling for files that
 may not be labelled conffiles, and are not shipped in a Debian package,
 but handled by the postinst instead. This script allows one to
 maintain files in /etc, preserving user changes and in general
 offering the same facilities while upgrading that dpkg normally
 provides for 'conffiles'.
 .
 Additionally, this script provides facilities for transitioning a
 file that had not been provided with conffile-like protection to come
 under this schema, and attempts to minimize questions asked at
 installation time. Indeed, the transitioning facility is better than the
 one offered by dpkg while transitioning a file from a non-conffile to
 conffile status.
Original-Maintainer: Manoj Srivastava <srivasta@debian.org>

Package: libgirepository-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 254
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.46.0-3ubuntu1
Depends: libc6 (>= 2.14), libffi6 (>= 3.0.4), libglib2.0-0 (>= 2.45.3)
Description: Library for handling GObject introspection data (runtime library)
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains a C library for handling the introspection data.
Homepage: https://wiki.gnome.org/GObjectIntrospection
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: libkmod2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 118
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: kmod
Version: 22-1ubuntu5.2
Depends: libc6 (>= 2.17)
Description: libkmod shared library
 This library provides an API for insertion, removal, configuration and
 listing of kernel modules.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 357
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.27.1-6ubuntu3.8
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: python3-markupsafe
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: markupsafe
Version: 0.23-2build2
Depends: python3 (<< 3.6), python3 (>= 3.5~), libc6 (>= 2.14)
Description: HTML/XHTML/XML string library for Python 3
 MarkupSafe is a Python library implementing a unicode subclass that is
 aware of HTML escaping rules. It can be used to implement automatic
 string escaping.
 .
 This package contains the Python 3 version.
Homepage: http://pypi.python.org/pypi/MarkupSafe
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>

Package: libfreetype6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 906
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: freetype
Version: 2.6.1-0.1ubuntu2.4
Depends: libc6 (>= 2.14), libpng12-0 (>= 1.2.13-4), zlib1g (>= 1:1.1.4)
Description: FreeType 2 font engine, shared library files
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>
Homepage: http://www.freetype.org
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libtasn1-6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Version: 4.7-3ubuntu0.16.04.3
Depends: libc6 (>= 2.14)
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.
Homepage: http://www.gnu.org/software/libtasn1/
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: isc-dhcp-client
Status: install ok installed
Priority: important
Section: net
Installed-Size: 610
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: isc-dhcp
Version: 4.3.3-5ubuntu12.10
Replaces: isc-dhcp-client-noddns
Provides: dhcp-client
Depends: libc6 (>= 2.15), libdns-export162, libisc-export160, debianutils (>= 2.8.2), iproute2
Recommends: isc-dhcp-common
Suggests: resolvconf, avahi-autoipd, isc-dhcp-client-ddns, apparmor
Conffiles:
 /etc/apparmor.d/sbin.dhclient 03efd29a659b09117c6125c416856d29
 /etc/dhcp/debug 521717b5f9e08db15893d3d062c59aeb
 /etc/dhcp/dhclient-exit-hooks.d/rfc3442-classless-routes 95e21c32fa7f603db75f1dc33db53cf5
 /etc/dhcp/dhclient.conf c3b6c3271031ab8e250a192f4eb18695
Description: DHCP client for automatically obtaining an IP address
 This is the Internet Software Consortium's DHCP client.
 .
 Dynamic Host Configuration Protocol (DHCP) is a protocol like BOOTP
 (actually dhcpd includes much of the functionality of bootpd). It
 gives client machines "leases" for IP addresses and can
 automatically set their network configuration. If your machine
 depends on DHCP (especially likely if it's a workstation on a large
 network, or a laptop, or attached to a cable modem), keep this or
 another DHCP client installed.
 .
 Extra documentation can be found in the package isc-dhcp-common.
Homepage: http://www.isc.org
Original-Maintainer: Debian ISC DHCP maintainers <pkg-dhcp-devel@lists.alioth.debian.org>

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 58
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20160110ubuntu0.2
Replaces: upstart (<< 1.12.1-0ubuntu8)
Breaks: upstart (<< 1.12.1-0ubuntu8)
Description: Linux Standard Base init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb
Original-Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>

Package: libhogweed4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 223
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: nettle
Version: 3.2-1ubuntu0.16.04.1
Depends: libc6 (>= 2.14), libgmp10 (>= 2:6.0.0), libnettle6 (= 3.2-1ubuntu0.16.04.1)
Description: low level cryptographic library (public-key cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the asymmetric cryptographic algorithms, which,
 require the GNU multiple precision arithmetic library (libgmp) for
 their large integer computations.
Homepage: http://www.lysator.liu.se/~nisse/nettle/
Original-Maintainer: Magnus Holmgren <holmgren@debian.org>

Package: netcat-openbsd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 109
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.105-7ubuntu1
Replaces: netcat (<< 1.10-35)
Provides: netcat
Depends: libbsd0 (>= 0.2.0), libc6 (>= 2.16)
Breaks: netcat (<< 1.10-35)
Description: TCP/IP swiss army knife
 A simple Unix utility which reads and writes data across network
 connections using TCP or UDP protocol.  It is designed to be a reliable
 "back-end" tool that can be used directly or easily driven by other
 programs and scripts. At the same time it is a feature-rich network
 debugging and exploration tool, since it can create almost any kind of
 connection you would need and has several interesting built-in
 capabilities.
 .
 This package contains the OpenBSD rewrite of netcat, including support
 for IPv6, proxies, and Unix sockets.
Original-Maintainer: Aron Xu <aron@debian.org>

Package: rsync
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 692
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 3.1.1-3ubuntu1.2
Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.15), libpopt0 (>= 1.14), lsb-base (>= 3.2-14), base-files (>= 4.0.1)
Suggests: openssh-client, openssh-server
Breaks: duplicity (<< 0.6.11)
Conffiles:
 /etc/default/rsync e0d7efac23e911c65f44b08de446e837
 /etc/init.d/rsync c5d89677f904551f5b192f35ad98d73c
Description: fast, versatile, remote (and local) file-copying tool
 rsync is a fast and versatile file-copying tool which can copy locally
 and to/from a remote host. It offers many options to control its behavior,
 and its remote-update protocol can minimize network traffic to make
 transferring updates between machines fast and efficient.
 .
 It is widely used for backups and mirroring and as an improved copy
 command for everyday use.
 .
 This package provides both the rsync command line tool and optional
 daemon functionality.
Homepage: http://rsync.samba.org/
Original-Maintainer: Paul Slootman <paul@debian.org>

Package: python3.5-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 8844
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3.5
Version: 3.5.2-2ubuntu0~16.04.8
Depends: libpython3.5-minimal (= 3.5.2-2ubuntu0~16.04.8), libexpat1 (>= 2.1~beta3), zlib1g (>= 1:1.2.0)
Pre-Depends: libc6 (>= 2.17)
Recommends: python3.5
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Description: Minimal subset of the Python language (version 3.5)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python3.5-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: procps
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 676
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2:3.3.10-4ubuntu2.4
Provides: watch
Depends: libc6 (>= 2.15), libncurses5 (>= 6), libncursesw5 (>= 6), libprocps4, libtinfo5 (>= 6), lsb-base (>= 4.1+Debian11ubuntu7), initscripts
Recommends: psmisc
Breaks: guymager (<= 0.5.9-1), open-vm-tools (<= 2011.12.20-562307-1), xmem (<= 1.20-27.1)
Conflicts: pgrep (<< 3.3-5), w-bassman (<< 1.0-3)
Conffiles:
 /etc/init.d/procps 021482ebab1024f5ed76e650e5191e8f
 /etc/init/procps-instance.conf 96170a339d08797dc90d69b01d6bf610
 /etc/init/procps.conf c273de3ebde8d4a50f17de17bb04a3e5
 /etc/sysctl.conf 76c1d8285c578d5e827c3e07b9738112
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.d/10-kernel-hardening.conf 5c1388f00011a287cdeba60208c674e1
 /etc/sysctl.d/10-link-restrictions.conf 8568316f2baa8db06554dab91f93a161
 /etc/sysctl.d/10-magic-sysrq.conf b3059f2835f17c97265433fdfdee358f
 /etc/sysctl.d/10-network-security.conf 4ac7258f5336e7eeaf448c05ab668d3c
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-zeropage.conf 8d7193abcc4dfedaf519dd03016a5e59
 /etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://gitorious.org/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libgssapi-krb5-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 412
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.13.2+dfsg-5ubuntu2.1
Depends: libc6 (>= 2.14), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.8+dfsg), libkrb5-3 (= 1.13.2+dfsg-5ubuntu2.1), libkrb5support0 (>= 1.13~alpha1+dfsg)
Suggests: krb5-doc, krb5-user
Breaks: libgssglue1 (<< 0.2-2)
Conffiles:
 /etc/gss/mech.d/README 27e753ba1dc72900d2892b8efef6e35e
Description: MIT Kerberos runtime libraries - krb5 GSS-API Mechanism
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the MIT Kerberos
 implementation of GSS-API used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libdevmapper-event1.02.1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2 (2.02.133-1ubuntu10)
Version: 2:1.02.110-1ubuntu10
Depends: libc6 (>= 2.15), libdevmapper1.02.1 (>= 2:1.02.103)
Description: Linux Kernel Device Mapper event support library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains the userspace library to help with event monitoring
 for devmapper devices, in conjunction with the dmevent daemon.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 669
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Version: 5.22.1-9ubuntu0.6
Replaces: perl-modules (<< 5.22.0~)
Depends: perl-base (= 5.22.1-9ubuntu0.6), perl-modules-5.22 (>= 5.22.1-9ubuntu0.6), libperl5.22 (= 5.22.1-9ubuntu0.6)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: netbase, rename
Suggests: perl-doc, libterm-readline-gnu-perl | libterm-readline-perl-perl, make
Breaks: perl-doc (<< 5.22.1-1)
Conflicts: libjson-pp-perl (<< 2.27200-2)
Conffiles:
 /etc/perl/Net/libnet.cfg fb2946cae573b8ed3d654a180d458733
Description: Larry Wall's Practical Extraction and Report Language
 Perl is a highly capable, feature-rich programming language with over
 20 years of development. Perl 5 runs on over 100 platforms from
 portables to mainframes. Perl is suitable for both rapid prototyping
 and large scale development projects.
 .
 Perl 5 supports many programming styles, including procedural,
 functional, and object-oriented. In addition to this, it is supported
 by an ever-growing collection of reusable modules which accelerate
 development. Some of these modules include Web frameworks, database
 integration, networking protocols, and encryption. Perl provides
 interfaces to C and C++ for custom extension development.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.21-2ubuntu1
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Original-Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Homepage: http://www.gnupg.org/related_software/libgpg-error/

Package: python3-problem-report
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 166
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: apport
Version: 2.20.1-0ubuntu2.19
Depends: python3:any (>= 3.3.2-2~)
Description: Python 3 library to handle problem reports
 This Python library provides an interface for creating, modifying,
 and accessing standardized problem reports for program and kernel
 crashes and packaging bugs.
 .
 These problem reports use standard Debian control format syntax
 (RFC822).
Homepage: https://wiki.ubuntu.com/Apport

Package: python3-blinker
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: blinker
Version: 1.3.dfsg2-1build1
Depends: python3:any (>= 3.3.2-2~)
Suggests: python-blinker-doc
Description: fast, simple object-to-object and broadcast signaling library
 Blinker provides a fast dispatching system that allows any number of
 interested parties to subscribe to events, or "signals".
 .
 Signal receivers can subscribe to specific senders or receive signals
 sent by any sender.
 .
 This package contains the Python 3 version.
Homepage: http://pythonhosted.org/blinker/
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: liblvm2cmd2.02
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1562
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.02.133-1ubuntu10
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.110), libudev1 (>= 183), dmeventd (>> 2:1.02.90)
Description: LVM2 command library
 This package contains the lvm2cmd shared library.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: busybox-initramfs
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 368
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: busybox
Version: 1:1.22.0-15ubuntu1.4
Depends: libc6 (>= 2.14)
Description: Standalone shell setup for initramfs
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.). The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 busybox-initramfs provides a simple stand alone shell that provides
 only the basic utilities needed for the initramfs.
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: lxd-client
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 8263
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxd
Version: 2.0.11-0ubuntu1~16.04.4
Replaces: lxc1 (<= 2.0.0~rc13-0ubuntu2~)
Depends: libc6 (>= 2.9)
Suggests: lxd
Breaks: lxc1 (<= 2.0.0~rc13-0ubuntu2~)
Description: Container hypervisor based on LXC - client
 LXD offers a REST API to remotely manage containers over the network,
 using an image based workflow and with support for live migration.
 .
 This package contains the command line client.
Built-Using: golang-1.6 (= 1.6.2-0ubuntu5~16.04.4), golang-context (= 0.0~git20140604.1.14f550f-1), golang-defaults (= 2:1.6-1ubuntu4), golang-github-gorilla-mux (= 0.0~git20150814.0.f7b6aaa-1), golang-github-gosexy-gettext (= 0~git20130221-0ubuntu6), golang-github-mattn-go-colorable (= 0.0~git20160226.9cbef7c3-1), golang-github-mattn-go-sqlite3 (= 1.1.0~dfsg1-1), golang-github-olekukonko-tablewriter (= 0.0~git20151029.0.a5eefc2-1), golang-github-pborman-uuid (= 0.0+git20150824.0.cccd189-1ubuntu1), golang-go.crypto (= 1:0.0~git20151201.0.7b85b09-2), golang-gocapability-dev (= 0.0~git20150506.1.66ef2aa-1ubuntu1), golang-gopkg-flosch-pongo2.v3 (= 3.0+git20141028.0.5e81b81-0ubuntu1), golang-gopkg-inconshreveable-log15.v2 (= 2.11+git20150921.0.b105bd3-0ubuntu1), golang-gopkg-lxc-go-lxc.v2 (= 0.0~git20161126.1.82a07a6-0ubuntu1~ubuntu16.04.1), golang-gopkg-tomb.v2 (= 0.0~git20140626.14b3d72-1), golang-goprotobuf (= 0.0~git20150526-2), golang-petname (= 2.4-0ubuntu1~16.04), golang-websocket (= 0.0~git20150811.0.b6ab76f-1), golang-yaml.v2 (= 0.0+git20160301.0.a83829b-1)
Homepage: https://linuxcontainers.org/

Package: snapd
Status: install ok installed
Priority: optional
Section: devel
Installed-Size: 61904
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.40
Replaces: snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Depends: adduser, apparmor (>= 2.10.95-0ubuntu2.2), ca-certificates, openssh-client, squashfs-tools, systemd, udev, init-system-helpers (>= 1.18~), libc6 (>= 2.17), libfuse2 (>= 2.8), liblzma5 (>= 5.1.1alpha+20110809), libudev1 (>= 183), zlib1g (>= 1:1.1.4)
Recommends: gnupg
Suggests: zenity | kdialog
Breaks: snap-confine (<< 2.23), snapd-xdg-open (<= 0.0.0), ubuntu-core-launcher (<< 2.22), ubuntu-snappy (<< 1.9), ubuntu-snappy-cli (<< 1.9)
Conflicts: snap (<< 2013-11-29-1ubuntu1)
Conffiles:
 /etc/apparmor.d/usr.lib.snapd.snap-confine.real 937fae09125cd55cee913cff2dee4bd0
 /etc/apt/apt.conf.d/20snapd.conf e0e08d8267c66b9f81340dd6500cb67a
 /etc/profile.d/apps-bin-path.sh 4414fd97a9702838e228899155875f15
 /etc/xdg/autostart/snap-userd-autostart.desktop 15b402a7e4a12ce2d82783ea49597251
Description: Daemon and tooling that enable snap packages
 Install, configure, refresh and remove snap packages. Snaps are
 'universal' packages that work across many different Linux systems,
 enabling secure distribution of the latest apps and utilities for
 cloud, servers, desktops and the internet of things.
 .
 Start with 'snap list' to see installed snaps.
Built-Using: apparmor (= 2.10.95-0ubuntu2.11), golang-1.10 (= 1.10.4-2ubuntu1~16.04.1), libcap2 (= 1:2.24-12), libseccomp (= 2.4.1-0ubuntu0.16.04.2)
Homepage: https://github.com/snapcore/snapd

Package: squashfs-tools
Status: install ok installed
Priority: optional
Section: kernel
Installed-Size: 292
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:4.3-3ubuntu2.16.04.3
Depends: libc6 (>= 2.14), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), liblzo2-2, zlib1g (>= 1:1.1.4)
Description: Tool to create and append to squashfs filesystems
 Squashfs is a highly compressed read-only filesystem for Linux. It uses zlib
 compression to compress both files, inodes and directories. Inodes in the
 system are very small and all blocks are packed to minimise data overhead.
 Block sizes greater than 4K are supported up to a maximum of 64K.
 .
 Squashfs is intended for general read-only filesystem use, for archival use
 (i.e. in cases where a .tar.gz file may be used), and in constrained block
 device/memory systems (e.g. embedded systems) where low overhead is needed.
Homepage: http://squashfs.sourceforge.net/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 9.4ubuntu4.8
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version e90148aa8aae3eb74ca11dc306b03dcd
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
 /etc/host.conf 89408008f2585c957c031716600d5a80
 /etc/issue 3a78cec1d9c34187a871b34ef868c446
 /etc/issue.net f2b96fe4699ab426a012979295f95841
 /etc/legal 0110925f6e068836ef2e09356e3651d9
 /etc/lsb-release 5faf576d9dc1206082ab5122bb5098cd
 /etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
 /etc/update-motd.d/10-help-text d95d18b11ac12cf6582d08a1643034f3
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: lxc-common
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: lxc
Version: 2.0.11-0ubuntu1~16.04.3
Replaces: lxc (<< 2.0.0~rc2-0ubuntu1~)
Depends: liblxc1 (= 2.0.11-0ubuntu1~16.04.3), apparmor (>= 2.8.96~2652-0ubuntu1), libc6 (>= 2.17)
Breaks: lxc (<< 2.0.0~rc2-0ubuntu1~)
Conffiles:
 /etc/apparmor.d/abstractions/lxc/container-base ebe5b2890dfe8e4185bf78775ad3dae3
 /etc/apparmor.d/abstractions/lxc/start-container 973416595c14f123a57916f8bf81d5ae
 /etc/apparmor.d/lxc-containers 78fd8b29fb81887bdab6313b3f5e6b3d
 /etc/apparmor.d/lxc/lxc-default eae02786d40a1ff7d317362d181f6eee
 /etc/apparmor.d/lxc/lxc-default-cgns 128c9d5468f16fdbd41033393c03b104
 /etc/apparmor.d/lxc/lxc-default-with-mounting 5e239a4100457fc09b4f02327283259d
 /etc/apparmor.d/lxc/lxc-default-with-nesting 0bbb509f3cb98028c754b9a3eb84d556
 /etc/apparmor.d/usr.bin.lxc-start e3822e488353a11a11387a4b3a3132b2
Description: Linux Containers userspace tools (common tools)
 Containers are insulated areas inside a system, which have their own namespace
 for filesystem, network, PID, IPC, CPU and memory allocation and which can be
 created using the Control Group and Namespace features included in the Linux
 kernel.
 .
 This package contains a few binaries and security profiles required by
 all liblxc1 users.
Homepage: https://linuxcontainers.org

Package: libyaml-0-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 162
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libyaml
Version: 0.1.6-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Fast YAML 1.1 parser and emitter library
 LibYAML is a C library for parsing and emitting data in YAML 1.1, a
 human-readable data serialization format.
Original-Maintainer: Anders Kaseorg <andersk@mit.edu>
Homepage: http://pyyaml.org/wiki/LibYAML

Package: libgmp10
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 554
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gmp
Version: 2:6.1.0+dfsg-2
Depends: libc6 (>= 2.14)
Description: Multiprecision arithmetic library
 GNU MP is a programmer's library for arbitrary precision
 arithmetic (ie, a bignum package).  It can operate on signed
 integer, rational, and floating point numeric types.
 .
 It has a rich set of functions, and the functions have a regular
 interface.
Original-Maintainer: Debian Science Team <debian-science-maintainers@lists.alioth.debian.org>
Homepage: http://gmplib.org/

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9ubuntu0.16.04.1
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: python3-pyasn1
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 194
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyasn1
Version: 0.1.9-1
Depends: python3:any (>= 3.3.2-2~)
Suggests: doc-base
Description: ASN.1 library for Python (Python 3 module)
 This  is  an implementation  of  ASN.1  types  and codecs  in  Python
 programming language. It has been first written to support particular
 protocol (SNMP) but then generalized  to be suitable for a wide range
 of protocols based on ASN.1 specification.
 .
 This package contains the Python 3 module.
Original-Maintainer: Jan Lübbe <jluebbe@debian.org>
Homepage: http://pyasn1.sourceforge.net/

Package: acpid
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 134
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:2.0.26-1ubuntu2
Depends: libc6 (>= 2.15), init-system-helpers (>= 1.18~), lsb-base (>= 4.1+Debian11ubuntu7), kmod
Conffiles:
 /etc/acpi/events/powerbtn 57f021ab2369f211018d6e7d11434314
 /etc/acpi/powerbtn.sh 8ddb9ce410dccdbccce532827188afd3
 /etc/default/acpid 5b934527919a9bba89c7978d15e918b3
 /etc/init.d/acpid 05d217072d397076fb17c42d27d66564
 /etc/init/acpid.conf 453ad369b68056df0f0c022e7c02d797
Description: Advanced Configuration and Power Interface event daemon
 Modern computers support the Advanced Configuration and Power Interface (ACPI)
 to allow intelligent power management on your system and to query battery and
 configuration status.
 .
 ACPID is a completely flexible, totally extensible daemon for delivering
 ACPI events. It listens on netlink interface (or on the deprecated file
 /proc/acpi/event), and when an event occurs, executes programs to handle the
 event. The programs it executes are configured through a set of configuration
 files, which can be dropped into place by packages or by the admin.
Homepage: http://sourceforge.net/projects/acpid2/
Original-Maintainer: Debian Acpi Team <pkg-acpi-devel@lists.alioth.debian.org>

Package: gir1.2-glib-2.0
Status: install ok installed
Priority: optional
Section: introspection
Installed-Size: 619
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gobject-introspection
Version: 1.46.0-3ubuntu1
Depends: libgirepository-1.0-1 (>= 1.45.4), libglib2.0-0 (>= 2.47.1)
Description: Introspection data for GLib, GObject, Gio and GModule
 GObject Introspection is a project for providing machine readable
 introspection data of the API of C libraries. This introspection
 data can be used in several different use cases, for example
 automatic code generation for bindings, API verification and documentation
 generation.
 .
 GObject Introspection contains tools to generate and handle the
 introspection data.
 .
 This package contains the introspection data for the GLib, GObject,
 GModule and Gio libraries.
Homepage: https://wiki.gnome.org/GObjectIntrospection
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: patch
Status: install ok installed
Priority: standard
Section: vcs
Installed-Size: 211
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.7.5-1ubuntu0.16.04.2
Depends: libc6 (>= 2.17)
Suggests: ed, diffutils-doc
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.
Homepage: http://savannah.gnu.org/projects/patch/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: libglib2.0-data
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 216
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: glib2.0
Version: 2.48.2-0ubuntu4.4
Description: Common files for GLib library
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package is needed for the runtime libraries to display messages in
 languages other than English.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2385
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.2-3.1ubuntu5.4
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), lsb-base (>= 4.1+Debian11ubuntu7), libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/init/passwd.conf 948960f10233ae11ffad9027ef430c3d
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: init-system-helpers
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 1.29ubuntu4
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: openssh-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 883
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.2p2-4ubuntu2.8
Replaces: ssh, ssh-krb5
Provides: ssh-server
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.17), libcomerr2 (>= 1.01), libgssapi-krb5-2 (>= 1.12.1+dfsg-2), libkrb5-3 (>= 1.13~alpha1+dfsg), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.2), libsystemd0, libwrap0 (>= 7.6-4~), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), lsb-base (>= 4.1+Debian11ubuntu7), openssh-client (= 1:7.2p2-4ubuntu2.8), libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0), procps, openssh-sftp-server
Recommends: xauth, ncurses-term, ssh-import-id
Suggests: ssh-askpass, rssh, molly-guard, ufw, monkeysphere
Conflicts: sftp, ssh-socks, ssh2
Conffiles:
 /etc/default/ssh 500e3cf069fe9a7b9936108eb9d9c035
 /etc/init.d/ssh aca247a51227a8f8b37a8c2a4a703571
 /etc/init/ssh.conf 9e5ed011987e63f8035fb847170dfa3f
 /etc/network/if-up.d/openssh-server 27e8d7b929948969ba71bf04fe269b4d
 /etc/pam.d/sshd 8b4c7a12b031424b2a9946881da59812
 /etc/ufw/applications.d/openssh-server 486b78d54b93cc9fdc950c1d52ff479e
Description: secure shell (SSH) server, for secure access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the sshd server.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 sshd replaces the insecure rshd program, which is obsolete for most
 purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: openssh-sftp-server
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: openssh
Version: 1:7.2p2-4ubuntu2.8
Replaces: openssh-server (<< 1:6.5p1-5)
Depends: libc6 (>= 2.17), openssh-client (= 1:7.2p2-4ubuntu2.8)
Recommends: openssh-server | ssh-server
Breaks: openssh-server (<< 1:6.5p1-5)
Enhances: openssh-server, ssh-server
Description: secure shell (SSH) sftp server module, for SFTP access from remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the SFTP server module for the SSH server. It
 is needed if you want to access your SSH server with SFTP. The SFTP
 server module also works with other SSH daemons like dropbear.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 336
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20160213-1ubuntu1
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: krb5-locales
Status: install ok installed
Priority: standard
Section: localization
Installed-Size: 2764
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: krb5
Version: 1.13.2+dfsg-5ubuntu2.1
Description: Internationalization support for MIT Kerberos
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains internationalized messages for MIT Kerberos.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3483
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.23-0ubuntu11
Depends: libc6 (>> 2.23), libc6 (<< 2.24)
Suggests: manpages
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 2.3-1build3
Depends: libsemanage-common (= 2.3-1build3), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.1.12), libsepol1 (>= 2.1.4), libustr-1.0-1 (>= 1.0.4)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: perl-modules-5.22
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 17264
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: perl
Version: 5.22.1-9ubuntu0.6
Replaces: libansicolor-perl (<< 4.03), libarchive-tar-perl (<< 2.04), libattribute-handlers-perl (<< 0.97), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150001), libcpan-meta-requirements-perl (<< 2.132), libcpan-meta-yaml-perl (<< 0.012), libdigest-perl (<< 1.17), libexperimental-perl (<< 0.013), libextutils-cbuilder-perl (<< 0.280221), libextutils-command-perl (<< 1.20), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.280000), libfile-spec-perl (<< 3.5600), libhttp-tiny-perl (<< 0.054), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27300), liblocale-codes-perl (<< 3.34), liblocale-maketext-perl (<< 1.26), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.999700), libmath-complex-perl (<< 1.59), libmodule-corelist-perl (<< 5.20151213), libmodule-load-conditional-perl (<< 0.64), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000026), libnet-perl, libnet-ping-perl (<< 2.43), libpackage-constants-perl, libparams-check-perl (<< 0.38), libparent-perl (<< 0.232), libparse-cpan-meta-perl (<< 1.4414), libperl-ostype-perl (<< 1.008), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.29), libtest-harness-perl (<< 3.35), libtest-simple-perl (<< 1.001014), libtest-tester-perl (<< 0.114), libtest-use-ok-perl (<< 0.16), libthread-queue-perl (<< 3.05), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.12), libversion-perl (<< 1:0.9909), libversion-requirements-perl, perl-base (<< 5.22.0~), perl-modules, podlators-perl
Provides: libansicolor-perl, libarchive-tar-perl, libattribute-handlers-perl, libautodie-perl, libcpan-meta-perl, libcpan-meta-requirements-perl, libcpan-meta-yaml-perl, libdigest-perl, libexperimental-perl, libextutils-cbuilder-perl, libextutils-command-perl, libextutils-install-perl, libextutils-parsexs-perl, libfile-spec-perl, libhttp-tiny-perl, libi18n-langtags-perl, libio-zlib-perl, libjson-pp-perl, liblocale-codes-perl, liblocale-maketext-perl, liblocale-maketext-simple-perl, libmath-bigint-perl, libmath-complex-perl, libmodule-corelist-perl, libmodule-load-conditional-perl, libmodule-load-perl, libmodule-metadata-perl, libnet-perl, libnet-ping-perl, libparams-check-perl, libparent-perl, libparse-cpan-meta-perl, libperl-ostype-perl, libpod-escapes-perl, libpod-parser-perl, libpod-simple-perl, libtest-harness-perl, libtest-simple-perl, libtest-tester-perl, libtest-use-ok-perl, libthread-queue-perl, libtime-local-perl, libunicode-collate-perl, libversion-perl, libversion-requirements-perl, perl-modules, podlators-perl
Depends: perl-base (>= 5.22.1-1)
Pre-Depends: dpkg (>= 1.17.17)
Recommends: perl (>= 5.22.1-1)
Breaks: cli-common (<< 0.9+nmu1), libansicolor-perl (<< 4.03), libarchive-tar-perl (<< 2.04), libattribute-handlers-perl (<< 0.97), libautodie-perl (<< 2.29-2), libcpan-meta-perl (<< 2.150001), libcpan-meta-requirements-perl (<< 2.132), libcpan-meta-yaml-perl (<< 0.012), libdigest-perl (<< 1.17), libexperimental-perl (<< 0.013), libextutils-cbuilder-perl (<< 0.280221), libextutils-command-perl (<< 1.20), libextutils-install-perl (<< 2.04), libextutils-parsexs-perl (<< 3.280000), libfile-spec-perl (<< 3.5600), libhttp-tiny-perl (<< 0.054), libi18n-langtags-perl (<< 0.40), libio-zlib-perl (<< 1.10), libjson-pp-perl (<< 2.27300), liblocale-codes-perl (<< 3.34), liblocale-maketext-perl (<< 1.26), liblocale-maketext-simple-perl (<< 0.21), libmath-bigint-perl (<< 1.999700), libmath-complex-perl (<< 1.59), libmodule-corelist-perl (<< 5.20151213), libmodule-load-conditional-perl (<< 0.64), libmodule-load-perl (<< 0.32), libmodule-metadata-perl (<< 1.000026), libnet-perl (<= 1:1.22), libnet-ping-perl (<< 2.43), libparams-check-perl (<< 0.38), libparent-perl (<< 0.232), libparse-cpan-meta-perl (<< 1.4414), libperl-ostype-perl (<< 1.008), libpod-escapes-perl (<< 1.07), libpod-parser-perl (<< 1.63), libpod-simple-perl (<< 3.29), libtest-harness-perl (<< 3.35), libtest-simple-perl (<< 1.001014), libtest-tester-perl (<< 0.114), libtest-use-ok-perl (<< 0.16), libthread-queue-perl (<< 3.05), libtime-local-perl (<< 1.2300), libunicode-collate-perl (<< 1.12), libversion-perl (<< 1:0.9909), libversion-requirements-perl (<< 0.101022), maildirsync (<< 1.2-2.1), mono-apache-server2 (<< 3.8-2.1), mono-apache-server4 (<< 3.8-2.1), mono-fastcgi-server2 (<< 3.8-2.1), mono-fastcgi-server4 (<< 3.8-2.1), patcher (<< 0.0.20040521-6.1), pdl (<< 1:2.007-4), perl (<< 5.22.1~), podlators-perl (<< 2.3.1), polygen-data (<< 1.0.6.ds2-13.1), pristine-tar (<< 1.33), pure-ftpd-common (<< 1.0.36-3.2), rinse (<< 3.0.7), shorewall (<< 4.6.4.3-2), shorewall-core (<< 4.6.4.3-2), tvtime (<< 1.0.2-14)
Conflicts: defoma (<< 0.11.12), mono-gac (<< 2.10.8.1-3), perl-modules
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.
 .
 Note that this package only exists to save archive space and should be
 considered an internal implementation detail of the `perl' package.
 Other packages should not depend on `perl-modules-5.22' directly, they
 should use `perl' (which depends on `perl-modules-5.22') instead.
Homepage: http://dev.perl.org/perl5/
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: libatm1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 123
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: linux-atm
Version: 1:2.5.1-1.5
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Conflicts: atm-tools (<< 2.4.1-6)
Description: shared library for ATM (Asynchronous Transfer Mode)
 Shared libraries needed by ATM (Asynchronous Transfer Mode) related programs
Original-Maintainer: Peter De Schrijver (p2) <p2@mind.be>
Homepage: http://linux-atm.sourceforge.net/

Package: python3-oauthlib
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 398
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-oauthlib
Version: 1.0.3-1
Depends: python3:any (>= 3.3.2-2~), python3-blinker, python3-cryptography, python3-jwt (>= 1.0.0)
Description: generic, spec-compliant implementation of OAuth for Python3
 OAuthLib is a generic utility which implements the logic of OAuth without
 assuming a specific HTTP request object. It can be used to graft OAuth support
 onto HTTP libraries.
 .
 OAuth1 is almost complete while OAuth2 is already in the works.
 .
 This package contains the Python 3 version of the library.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: https://github.com/idan/oauthlib

Package: libseccomp2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 302
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libseccomp
Version: 2.4.1-0ubuntu0.16.04.2
Depends: libc6 (>= 2.4)
Description: high level interface to Linux seccomp filter
 This library provides a high level interface to constructing, analyzing
 and installing seccomp filters via a BPF passed to the Linux Kernel's
 prctl() syscall.
Homepage: https://github.com/seccomp/libseccomp
Original-Maintainer: Kees Cook <kees@debian.org>

Package: udev
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 6732
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: systemd
Version: 229-4ubuntu21.22
Replaces: bash-completion (<< 1:2.1), systemd (<< 224-2)
Depends: libacl1 (>= 2.2.51-8), libblkid1 (>= 2.19.1), libc6 (>= 2.17), libkmod2 (>= 5~), libselinux1 (>= 2.0.65), lsb-base (>= 4.1+Debian11ubuntu7), adduser, libudev1 (= 229-4ubuntu21.22), util-linux (>= 2.27.1), procps
Pre-Depends: dpkg (>= 1.17.14)
Breaks: bash-completion (<< 1:2.1), consolekit (<< 0.4.6-1), ifupdown (<< 0.8.5~), kmod (<< 14), lvm2 (<< 2.02.133-1ubuntu1), mdadm (<< 3.3-2ubuntu3), plymouth (<< 0.9.0-7), systemd (<< 224-2)
Conffiles:
 /etc/init.d/udev e4da2ae5c153148fad0b3f6e5e7ce61e
 /etc/init/udev.conf 41c0081f3a830e0902aaff76a53edf98
 /etc/init/udevmonitor.conf ec187fc822d47c41416e7c531c8c48dd
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/modprobe.d/fbdev-blacklist.conf 0b9c466830040ec52986cc3ea117bef5
 /etc/udev/udev.conf a9c43ddab6e58eefa56db50ff44b2b46
Description: /dev/ and hotplug management daemon
 udev is a daemon which dynamically creates and removes device nodes from
 /dev/, handles hotplug events and loads drivers at boot time.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: libapparmor1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: apparmor
Version: 2.10.95-0ubuntu2.11
Depends: libc6 (>= 2.17)
Description: changehat AppArmor library
 This package provides the shared library used for making use of the
 AppArmor profile and changehat functionality, as well as common log
 parsing routines.
Homepage: http://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>

Package: iptables
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1624
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.6.0-2ubuntu3
Depends: libxtables11 (= 1.6.0-2ubuntu3), libc6 (>= 2.14), libnfnetlink0
Description: administration tools for packet filtering and NAT
 iptables is the userspace command line program used to configure
 the Linux packet filtering ruleset. It is targeted towards system
 administrators. Since Network Address Translation is also configured
 from the packet filter ruleset, iptables is used for this, too. The
 iptables package also includes ip6tables. ip6tables is used for
 configuring the IPv6 packet filter
Homepage: http://www.netfilter.org/
Original-Maintainer: iptables devel team <pkg-netfilter-devel@lists.alioth.debian.org>

Package: libldap-2.4-2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 507
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: openldap
Version: 2.4.42+dfsg-2ubuntu3.7
Replaces: libldap-2.3-0, libldap2
Depends: libc6 (>= 2.14), libgnutls30 (>= 3.4.2), libgssapi3-heimdal (>= 1.4.0+git20110226), libsasl2-2
Conflicts: ldap-utils (<= 2.1.23-1)
Conffiles:
 /etc/ldap/ldap.conf 0b3f4d19d88498314478273ce10b0a70
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.
Homepage: http://www.openldap.org/
Original-Maintainer: Debian OpenLDAP Maintainers <pkg-openldap-devel@lists.alioth.debian.org>

Package: python3-chardet
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 496
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: chardet
Version: 2.3.0-2
Depends: python3:any (>= 3.3.2-2~), python3-pkg-resources
Description: universal character encoding detector for Python3
 Chardet takes a sequence of bytes in an unknown character encoding, and
 attempts to determine the encoding.
 .
 Supported encodings:
  * ASCII, UTF-8, UTF-16 (2 variants), UTF-32 (4 variants)
  * Big5, GB2312, EUC-TW, HZ-GB-2312, ISO-2022-CN (Traditional and Simplified
    Chinese)
  * EUC-JP, SHIFT_JIS, ISO-2022-JP (Japanese)
  * EUC-KR, ISO-2022-KR (Korean)
  * KOI8-R, MacCyrillic, IBM855, IBM866, ISO-8859-5, windows-1251 (Cyrillic)
  * ISO-8859-2, windows-1250 (Hungarian)
  * ISO-8859-5, windows-1251 (Bulgarian)
  * windows-1252 (English)
  * ISO-8859-7, windows-1253 (Greek)
  * ISO-8859-8, windows-1255 (Visual and Logical Hebrew)
  * TIS-620 (Thai)
 .
 This library is a port of the auto-detection code in Mozilla.
 .
 This package contains the Python 3 version of the library.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>
Homepage: https://github.com/chardet/chardet

Package: sosreport
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 1548
Maintainer: Louis Bouchard <louis.bouchard@ubuntu.com>
Architecture: amd64
Version: 3.6-1ubuntu0.16.04.3
Depends: python3-six, python3:any (>= 3.3.2-2~)
Conffiles:
 /etc/sos.conf ee501054a13f29cb3109a4e92da34723
Description: Set of tools to gather troubleshooting data from a system
 Sos is a set of tools that gathers information about system
 hardware and configuration. The information can then be used for
 diagnostic purposes and debugging. Sos is commonly used to help
 support technicians and developers.
Homepage: https://github.com/sosreport/sos

Package: libasprintf0v5
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 47
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gettext
Version: 0.19.7-2ubuntu3.1
Replaces: gettext-base (<< 0.18.1.1-6), libasprintf0c2
Depends: libc6 (>= 2.14), libstdc++6 (>= 5.2)
Breaks: gettext-base (<< 0.18.1.1-6), libasprintf0c2
Description: GNU library to use fprintf and friends in C++
 This package contains the libasprintf shared library which makes the
 C formatted output routines (fprintf et al.) usable in C++ programs,
 for use with the <string> strings and the <iostream> streams.
Homepage: http://www.gnu.org/software/gettext/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: python3-systemd
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 149
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: python-systemd
Version: 231-2build1
Depends: python3 (<< 3.6), python3 (>= 3.5~), libc6 (>= 2.17), libsystemd0 (>= 219)
Description: Python 3 bindings for systemd
 This package contains Python 3 bindings for native access to the
 systemd facilities.
 .
 Functionality is separated into a number of modules:
  * systemd.journal supports sending of structured messages to the
    journal and reading journal files
  * systemd.daemon wraps parts of libsystemd useful for writing daemons
    and socket activation
  * systemd.id128 provides functions for querying machine and boot
    identifiers and a list of message identifiers provided by systemd
  * systemd.login wraps parts of libsystemd used to query logged in
    users and available seats and machines
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Homepage: http://www.freedesktop.org/wiki/Software/systemd

Package: sysvinit-utils
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 124
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.3ubuntu2
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.25~)
Suggests: bootlogd, sash
Breaks: systemd (<< 215), upstart (<< 1.5-0ubuntu5), util-linux (<< 2.26.2-3)
Conflicts: chkconfig (<< 11.0-79.1-2), last, startpar (<< 0.58-2), sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: xz-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 384
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 5.1.1alpha+20120614-2ubuntu2
Replaces: lzip (<< 1.8~rc2), xz-lzma
Provides: lzma
Depends: libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614)
Breaks: lzip (<< 1.8~rc2)
Conflicts: lzma (<< 9.22-1), xz-lzma
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Homepage: http://tukaani.org/xz/
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>

Package: libheimbase1-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 106
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libc6 (>= 2.14)
Description: Heimdal Kerberos - Base library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the base library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: python3-jinja2
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 812
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: jinja2
Version: 2.8-1ubuntu0.1
Depends: python3-markupsafe, python3:any (>= 3.3.2-2~)
Recommends: python3-pkg-resources
Suggests: python-jinja2-doc
Description: small but fast and easy to use stand-alone template engine
 Jinja2 is a template engine written in pure Python. It provides a Django
 inspired non-XML syntax but supports inline expressions and an optional
 sandboxed environment.
 .
 The key-features are:
  * Configurable syntax. If you are generating LaTeX or other formats with
    Jinja2 you can change the delimiters to something that integrates better
    into the LaTeX markup.
  * Fast. While performance is not the primarily target of Jinja2 it’s
    surprisingly fast. The overhead compared to regular Python code was reduced
    to the very minimum.
  * Easy to debug. Jinja2 integrates directly into the Python traceback system
    which allows you to debug Jinja2 templates with regular Python debugging
    helpers.
  * Secure. It’s possible to evaluate untrusted template code if the optional
    sandbox is enabled. This allows Jinja2 to be used as templating language
    for applications where users may modify the template design.
Homepage: http://jinja.pocoo.org/
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 28
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.3-1build3
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf e69d42a4d98a93c3b8e201bdda367c55
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: libp11-kit0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 433
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: p11-kit
Version: 0.23.2-5~ubuntu16.04.1
Depends: libc6 (>= 2.16), libffi6 (>= 3.0.4)
Description: library for loading and coordinating access to PKCS#11 modules - runtime
 The p11-kit library provides a way to load and enumerate Public-Key
 Cryptography Standard #11 modules, along with a standard configuration
 setup for installing PKCS#11 modules so that they're discoverable. It
 also solves problems with coordinating the use of PKCS#11 by different
 components or libraries living in the same process.
 .
 This package contains the shared library required for applications loading
 and accessing PKCS#11 modules.
Homepage: http://p11-glue.freedesktop.org/p11-kit.html
Original-Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>

Package: python3-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 120
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: allowed
Source: python3-defaults
Version: 3.5.1-3
Replaces: python3 (<< 3.3.2-13~), python3.1 (<< 3.1-2)
Depends: python3.5-minimal (>= 3.5.1-2~), dpkg (>= 1.13.20)
Breaks: idle3 (<< 3.1), python3 (<< 3.3.2-13~), python3-all (<< 3.1), python3-all-dbg (<< 3.1), python3-all-dev (<< 3.1), python3-dbg (<< 3.1), python3-dev (<< 3.1), python3-examples (<< 3.1)
Description: minimal subset of the Python language (default python3 version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python3.5-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.python.org/

Package: gdisk
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 746
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.1-1build1
Depends: libc6 (>= 2.14), libgcc1 (>= 1:3.0), libncursesw5 (>= 6), libpopt0 (>= 1.14), libstdc++6 (>= 5.2), libtinfo5 (>= 6), libuuid1 (>= 2.16)
Recommends: groff-base
Description: GPT fdisk text-mode partitioning tool
 GPT fdisk (aka gdisk) is a text-mode partitioning
 tool that works on Globally Unique Identifier
 (GUID) Partition Table (GPT) disks, rather than
 on the more common (through 2009)
 Master Boot Record (MBR) partition tables.
Original-Maintainer: Guillaume Delacour <gui@iroqwa.org>
Homepage: http://sourceforge.net/projects/gptfdisk/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.198ubuntu1
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: python3-jsonpatch
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-json-patch
Version: 1.19-3
Replaces: python3-json-patch (<< 1.3-3~)
Depends: python3-json-pointer (>= 1.9), python3:any (>= 3.3.2-2~)
Breaks: python3-json-patch (<< 1.3-3~)
Description: library to apply JSON patches - Python 3.x
 Python-json-patch is a Python module (a library) to apply JSON Patches
 according to the IETF draft specification.
 .
 From the IETF site:
 .
 JavaScript Object Notation (JSON) [RFC4627] is a common format for the
 exchange and storage of structured data.  HTTP PATCH [RFC5789] extends the
 Hypertext Transfer Protocol (HTTP) [RFC2616] with a method to perform partial
 modifications to resources.
 .
 JSON Patch is a format (identified by the media type "application/
 json-patch") for expressing a sequence of operations to apply to a target JSON
 document, suitable for use with the HTTP PATCH method.
 .
 This format is also potentially useful in other cases when it's necessary to
 make partial updates to a JSON document.
 .
 This package provides the Python 3.x module.
Original-Maintainer: PKG OpenStack <openstack-devel@lists.alioth.debian.org>
Homepage: https://github.com/stefankoegl/python-json-patch

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 168
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libselinux
Version: 2.4-3build2
Depends: libc6 (>= 2.14), libpcre3
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: systemd
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 18912
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 229-4ubuntu21.22
Replaces: systemd-services, udev (<< 228-5)
Provides: systemd-services
Depends: libacl1 (>= 2.2.51-8), libapparmor1 (>= 2.9.0-3+exp2), libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.19.1), libcap2 (>= 1:2.10), libcryptsetup4 (>= 2:1.4.3), libgpg-error0 (>= 1.14), libkmod2 (>= 5~), libmount1 (>= 2.26.2), libpam0g (>= 0.99.7.1), libseccomp2 (>= 2.2.3-3~), libselinux1 (>= 2.1.9), libsystemd0 (= 229-4ubuntu21.22), util-linux (>= 2.27.1), mount (>= 2.26), adduser, libcap2-bin
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.6.1), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 1.32)
Recommends: libpam-systemd, dbus
Suggests: systemd-ui, systemd-container
Breaks: apparmor (<< 2.9.2-1), ifupdown (<< 0.8.5~), lsb-base (<< 4.1+Debian4), lvm2 (<< 2.02.104-1), systemd-shim (<< 8-2), udev (<< 228-5)
Conflicts: klogd, systemd-services
Conffiles:
 /etc/dbus-1/system.d/org.freedesktop.hostname1.conf f55c94d000b5d62b5f06d38852977dd1
 /etc/dbus-1/system.d/org.freedesktop.locale1.conf 5893ab03e7e96aa3759baceb4dd04190
 /etc/dbus-1/system.d/org.freedesktop.login1.conf 4aac4fe1a99c9fca83c85b80e4e0c2ba
 /etc/dbus-1/system.d/org.freedesktop.network1.conf 162e9a90d8f824f79ef2c6390827ec7b
 /etc/dbus-1/system.d/org.freedesktop.resolve1.conf 6969148b4616c56a5c9065cec5ab0775
 /etc/dbus-1/system.d/org.freedesktop.systemd1.conf 846824928e39a465c06c3aae53510535
 /etc/dbus-1/system.d/org.freedesktop.timedate1.conf 682369fbf3de26b21e775732c89a2bbe
 /etc/dhcp/dhclient-exit-hooks.d/timesyncd a891f21f45b0648b7082d999bf424591
 /etc/pam.d/systemd-user 3bdb96b18046bd209135cdfe73421db6
 /etc/systemd/bootchart.conf 7cb6c9cab8ec511882e0e05fceb87e45
 /etc/systemd/journald.conf d928a3ce9f51fcff8ed925270f14a2aa
 /etc/systemd/logind.conf 5b41bb868487d1013382b738f6648328
 /etc/systemd/resolved.conf cc77726b02979ddc8b034a338f7bdea9
 /etc/systemd/system.conf 1340491c660f9eb234c92fe1225ff427
 /etc/systemd/timesyncd.conf 4e1cf2b5f85dff6c1f186135b9f66a85
 /etc/systemd/user.conf 2eaf5976751be8864d0555f30814d832
Description: system and service manager
 systemd is a system and service manager for Linux. It provides aggressive
 parallelization capabilities, uses socket and D-Bus activation for starting
 services, offers on-demand starting of daemons, keeps track of processes
 using Linux control groups, supports snapshotting and restoring of the system
 state, maintains mount and automount points and implements an elaborate
 transactional dependency-based service control logic.
 .
 systemd is compatible with SysV and LSB init scripts and can work as a
 drop-in replacement for sysvinit.
 .
 Installing the systemd package will not switch your init system unless you
 boot with init=/bin/systemd or install systemd-sysv in addition.
Homepage: http://www.freedesktop.org/wiki/Software/systemd
Original-Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6656
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.18.4ubuntu1.6
Replaces: manpages-it (<< 2.80-4)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4), tar (>= 1.23)
Suggests: apt
Breaks: apt (<< 0.7.7~), apt-cudf (<< 3.3~beta1-3~), aptitude (<< 0.4.7-1~), auctex (<< 11.87-3+deb8u1~), ccache (<< 3.1.10-1~), cups (<< 1.7.5-10~), dbus (<< 1.8.12-1ubuntu6~), debian-security-support (<< 2014.10.26~), distcc (<< 3.1-6.1~), doc-base (<< 0.10.5~), dpkg-dev (<< 1.15.8), fontconfig (<< 2.11.1-0ubuntu5~), fusionforge-plugin-mediawiki (<< 5.3.2+20141104-3~), gap-core (<< 4r7p5-2~), gitweb (<< 1:2.1.4-2.1~), grace (<< 1:5.1.24-3~), gxine (<< 0.5.908-3.1~), hoogle (<< 4.2.33-4~), icecc (<< 1.0.1-2~), install-info (<< 5.1.dfsg.1-3~), libapache2-mod-php5 (<< 5.6.4+dfsg-3~), libapache2-mod-php5filter (<< 5.6.4+dfsg-3~), libdpkg-perl (<< 1.15.8), libjs-protoaculous (<< 5~), man-db (<< 2.6.3-6~), mcollective (<< 2.6.0+dfsg-2.1~), php5-fpm (<< 5.6.4+dfsg-3~), pypy (<< 2.4.0+dfsg-3~), readahead-fedora (<< 2:1.5.6-5.2~), software-center (<< 13.10-0ubuntu9~), ufw (<< 0.35-0ubuntu2~), ureadahead (<< 0.100.0-17~), wordpress (<< 4.1+dfsg-1~), xfonts-traditional (<< 1.7~), xine-ui (<< 0.99.9-1.2~)
Conflicts: ada-reference-manual (<< 20021112web-4~), asn1-mode (<< 2.7-7~), bogosort (<< 0.4.2-3~), cl-yacc (<< 0.3-3~), cpp-4.1-doc (<< 4.1.2.nf2-4~), cpp-4.2-doc (<< 4.2.4.nf1-4~), gcc-4.1-doc (<< 4.1.2.nf2-4~), gcc-4.2-doc (<< 4.2.4.nf1-4~), gcj-4.1-doc (<< 4.1.2.nf2-4~), gcj-4.2-doc (<< 4.2.4.nf1-4~), gfortran-4.1-doc (<< 4.1.2.nf2-4~), gfortran-4.2-doc (<< 4.2.4.nf1-4~), ggz-docs (<< 0.0.14.1-2~), glame (<< 2.0.1-6~), gnat-4.1-doc (<< 4.1.2.nf2-4~), gnat-4.2-doc (<< 4.2.4.nf1-4~), gtalk (<< 0.99.10-16~), libalogg-dev (<< 1.3.7-2~), libgtk1.2-doc (<< 1.2.10-19~), libnettle-dev (<< 2~), liborbit-dev (<< 0.5.17-12~), libreadline5-dev (<< 5.2-8~), librep-doc (<< 0.90~), mmucl (<< 1.5.2-3~), nxml-mode (<< 20041004-9~), octave3.0-info (<< 1:3.0.5-7+rm), octave3.2-info (<< 3.2.4-12+rm), polgen-doc (<< 1.3-3+rm), r6rs-doc (<< 1.0-2~), serveez-doc (<< 0.1.5-3~), slat (<< 2.0-6~), texlive-base-bin-doc (<< 2007.dfsg.2-9~), ttcn-el (<< 0.6.9-2~), ulog-acctd (<< 0.4.3-3~), xconq-doc (<< 7.4.1-5~), zenirc (<< 2.112.dfsg-1~)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: cryptsetup-bin
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 272
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: cryptsetup
Version: 2:1.6.6-5ubuntu2.1
Replaces: cryptsetup (<< 2:1.4.1-2ubuntu2~)
Depends: libc6 (>= 2.15), libcryptsetup4 (>= 2:1.6), libpopt0 (>= 1.14)
Breaks: cryptsetup (<< 2:1.4.1-2ubuntu2~)
Description: disk encryption support - command line tools
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides cryptsetup, cryptsetup-reencrypt and luksformat.
Homepage: http://code.google.com/p/cryptsetup/
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>

Package: openssl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 934
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.0.2g-1ubuntu4.15
Depends: libc6 (>= 2.15), libssl1.0.0 (>= 1.0.2g)
Suggests: ca-certificates
Conffiles:
 /etc/ssl/openssl.cnf 7df26c55291b33344dc15e3935dabaf3
Description: Secure Sockets Layer toolkit - cryptographic utility
 This package is part of the OpenSSL project's implementation of the SSL
 and TLS cryptographic protocols for secure communication over the
 Internet.
 .
 It contains the general-purpose command line binary /usr/bin/openssl,
 useful for cryptographic operations such as:
  * creating RSA, DH, and DSA key parameters;
  * creating X.509 certificates, CSRs, and CRLs;
  * calculating message digests;
  * encrypting and decrypting with ciphers;
  * testing SSL/TLS clients and servers;
  * handling S/MIME signed or encrypted mail.
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: wget
Status: install ok installed
Priority: important
Section: web
Installed-Size: 884
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.17.1-1ubuntu1.5
Depends: libc6 (>= 2.17), libidn11 (>= 1.13), libpcre3, libssl1.0.0 (>= 1.0.1), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Recommends: ca-certificates
Conflicts: wget-ssl
Conffiles:
 /etc/wgetrc c43064699caf6109f4b3da0405c06ebb
Description: retrieves files from the web
 Wget is a network utility to retrieve files from the web
 using HTTP(S) and FTP, the two most widely used internet
 protocols. It works non-interactively, so it will work in
 the background, after having logged off. The program supports
 recursive retrieval of web-authoring pages as well as FTP
 sites -- you can use Wget to make mirrors of archives and
 home pages or to travel the web like a WWW robot.
 .
 Wget works particularly well with slow or unstable connections
 by continuing to retrieve a document until the document is fully
 downloaded. Re-getting files from where it left off works on
 servers (both HTTP and FTP) that support it. Both HTTP and FTP
 retrievals can be time stamped, so Wget can see if the remote
 file has changed since the last retrieval and automatically
 retrieve the new version if it has.
 .
 Wget supports proxy servers; this can lighten the network load,
 speed up retrieval, and provide access behind firewalls.
Homepage: https://www.gnu.org/software/wget/
Original-Maintainer: Noël Köthe <noel@debian.org>

Package: vim-common
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 366
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: vim
Version: 2:7.4.1689-3ubuntu1.3
Replaces: vim-gui-common (<< 2:7.4.488-4~)
Depends: libc6 (>= 2.3.4)
Recommends: vim | vim-gnome | vim-gtk | vim-gtk3 | vim-athena | vim-nox | vim-tiny
Suggests: vim-gnome-py2 | vim-gtk-py2 | vim-gtk3-py2 | vim-athena-py2 | vim-nox-py2
Breaks: vim-gui-common (<< 2:7.4.488-4~)
Conffiles:
 /etc/vim/vimrc b458e7b28b9bc2d04bd5a3fd0f8d777e
Description: Vi IMproved - Common files
 Vim is an almost compatible version of the UNIX editor Vi.
 .
 This package contains files shared by all non GUI-enabled vim variants
 available in Debian.  Examples of such shared files are: manpages,
 common executables like xxd, and configuration files.
Homepage: http://www.vim.org/
Original-Maintainer: Debian Vim Maintainers <pkg-vim-maintainers@lists.alioth.debian.org>

Package: unattended-upgrades
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 384
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 1.1ubuntu1.18.04.7~16.04.3
Depends: debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), debconf, gir1.2-glib-2.0, powermgmt-base, python3, python3-apt, python3-gi, python3-dbus, ucf, lsb-release, lsb-base, xz-utils
Recommends: cron | cron-daemon | anacron
Suggests: bsd-mailx, default-mta | mail-transport-agent, needrestart
Conffiles:
 /etc/init.d/unattended-upgrades 290829a5efc55b7c435de0bb769f217b
 /etc/kernel/postinst.d/unattended-upgrades 6b7d48fa1e4cd6b8cf445a2fb494288a
 /etc/logrotate.d/unattended-upgrades e45049ee847f069a99e3e6ec39155d4a
 /etc/pm/sleep.d/10_unattended-upgrades-hibernate 0f5d54aa2dd322c805c90e409fc2724a
Description: automatic installation of security upgrades
 This package can download and install security upgrades automatically
 and unattended, taking care to only install packages from the
 configured APT source, and checking for dpkg prompts about
 configuration file changes.
 .
 This script is the backend for the APT::Periodic::Unattended-Upgrade
 option.
Original-Maintainer: Michael Vogt <mvo@debian.org>

Package: libsqlite3-0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 952
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: sqlite3
Version: 3.11.0-1ubuntu1.2
Depends: libc6 (>= 2.14)
Description: SQLite 3 shared library
 SQLite is a C library that implements an SQL database engine.
 Programs that link with the SQLite library can have SQL database
 access without running a separate RDBMS process.
Homepage: http://www.sqlite.org/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: python3-requests
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: requests
Version: 2.9.1-3ubuntu0.1
Depends: python3-urllib3 (>= 1.13.1), python3:any (>= 3.3.2-2~), ca-certificates, python3-chardet, python3-urllib3 (<< 1.13.2)
Suggests: python3-ndg-httpsclient, python3-openssl, python3-pyasn1
Description: elegant and simple HTTP library for Python3, built for human beings
 Requests allow you to send HTTP/1.1 requests. You can add headers, form data,
 multipart files, and parameters with simple Python dictionaries, and access
 the response data in the same way. It's powered by httplib and urllib3, but
 it does all the hard work and crazy hacks for you.
 .
 Features
 .
   - International Domains and URLs
   - Keep-Alive & Connection Pooling
   - Sessions with Cookie Persistence
   - Browser-style SSL Verification
   - Basic/Digest Authentication
   - Elegant Key/Value Cookies
   - Automatic Decompression
   - Unicode Response Bodies
   - Multipart File Uploads
   - Connection Timeouts
 .
 This package contains the Python 3 version of the library.
Homepage: http://python-requests.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: sysv-rc
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.3ubuntu2
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Pre-Depends: init-system-helpers (>= 1.25~)
Recommends: lsb-base (>= 3.2-14)
Suggests: bum
Breaks: initscripts (<< 2.86.ds1-63), systemd (<< 215)
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: lxcfs
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 135
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.0.8-0ubuntu1~16.04.2
Depends: libc6 (>= 2.17), libfuse2 (>= 2.6), init-system-helpers (>= 1.18~), lsb-base (>= 4.1+Debian11ubuntu7)
Conffiles:
 /etc/init.d/lxcfs f44261ec5f8ffb4aaf50f128cdd78b50
 /etc/init/lxcfs.conf c3fed3dbce6615cdee6d1884f14cff3d
Description: FUSE based filesystem for LXC
 LXCFS provides a FUSE based filesystem to improve the LXC experience
 within the containers.
 .
 This filesystem offers both a cgroupfs-like view for use by
 unprivileged containers which wouldn't otherwise be allowed to mount
 cgroupfs. And a set of files that are meant to be bind-mounted over
 their /proc equivalent to make them cgroup-aware.
Homepage: https://linuxcontainers.org
Original-Maintainer: pkg-lxc <pkg-lxc-devel@lists.alioth.debian.org>

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3458
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.2.32
Replaces: bash-completion (<< 1:2.1-4.2+fakesync1), manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Depends: libapt-pkg5.0 (>= 1.2.32), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2), init-system-helpers (>= 1.18~), ubuntu-keyring, gpgv | gpgv2, gnupg | gnupg2, adduser
Suggests: aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), apt-doc, python-apt
Breaks: apt-utils (<< 1.1.3), manpages-it (<< 2.80-4~), manpages-pl (<< 20060617-3~), openjdk-6-jdk (<< 6b24-1.11-0ubuntu1~), sun-java5-jdk (>> 0), sun-java6-jdk (>> 0)
Conffiles:
 /etc/apt/apt.conf.d/01-vendor-ubuntu 5232396660502461fc834c0a1229dbe4
 /etc/apt/apt.conf.d/01autoremove 76120d358bc9037bb6358e737b3050b5
 /etc/cron.daily/apt-compat bc4a71cbcaeed4179f25d798257fa980
 /etc/kernel/postinst.d/apt-auto-removal 8ad76ae4492b54f0dcbf18c79429dfab
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: apport
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 760
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Version: 2.20.1-0ubuntu2.19
Replaces: core-dump-handler, python-apport (<< 2.2-0ubuntu1)
Provides: core-dump-handler
Depends: python3, python3-apport (>= 2.20.1-0ubuntu2.19), lsb-base (>= 4.1+Debian11ubuntu7), python3-gi, gir1.2-glib-2.0 (>= 1.29.17), init-system-helpers (>= 1.18~)
Recommends: apport-symptoms, policykit-1, python3-systemd
Suggests: apport-gtk | apport-kde
Breaks: python-apport (<< 2.2-0ubuntu1)
Conflicts: core-dump-handler
Conffiles:
 /etc/apport/blacklist.d/README.blacklist c2ed1eb9a17ec2550747b4960cf4b73c
 /etc/apport/blacklist.d/apport 44503501302b80099552bac0204a45c1
 /etc/apport/crashdb.conf 0bb3a2832a92a0401e00583bf2d23e93
 /etc/bash_completion.d/apport_completion dfe766d9328bb5c895038b44185133f9
 /etc/cron.daily/apport df5d3bc9ab3a67b58156376318077304
 /etc/default/apport 3446c6cac185f44237f59786e006ebe4
 /etc/init.d/apport 96d410e3149a2590bbf1cdd194a64c2a
 /etc/init/apport.conf 7a4dab1c982d9c3cf7bb58b87c2a48e2
 /etc/logrotate.d/apport fa54dab59ef899b48d5455c976008df4
Description: automatically generate crash reports for debugging
 apport automatically collects data from crashed processes and
 compiles a problem report in /var/crash/. This utilizes the crashdump
 helper hook provided by the Ubuntu kernel.
 .
 This package also provides a command line frontend for browsing and
 handling the crash reports. For desktops, you should consider
 installing the GTK+ or Qt user interface (apport-gtk or apport-kde).
Homepage: https://wiki.ubuntu.com/Apport

Package: liblocale-gettext-perl
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.07-1build1
Depends: libc6 (>= 2.2.5)
Pre-Depends: perl-base (>= 5.22.1-1), perlapi-5.22.1
Description: module using libc functions for internationalization in Perl
 The Locale::gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().
Original-Maintainer: Debian Perl Group <pkg-perl-maintainers@lists.alioth.debian.org>
Homepage: https://metacpan.org/release/gettext

Package: libmpfr4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 812
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpfr4
Version: 3.1.4-1
Depends: libc6 (>= 2.14), libgmp10
Breaks: libgmp3 (<< 4.1.4-3)
Description: multiple precision floating-point computation
 MPFR provides a library for multiple-precision floating-point computation
 with correct rounding.  The computation is both efficient and has a
 well-defined semantics. It copies the good ideas from the
 ANSI/IEEE-754 standard for double-precision floating-point arithmetic
 (53-bit mantissa).
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Homepage: http://www.mpfr.org/

Package: dmsetup
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 225
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: lvm2 (2.02.133-1ubuntu10)
Version: 2:1.02.110-1ubuntu10
Depends: libc6 (>= 2.14), libdevmapper1.02.1 (>= 2:1.02.107), util-linux (>> 2.16)
Conflicts: devicekit-disks (<< 009)
Description: Linux Kernel Device Mapper userspace library
 The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management)
 Team's implementation of a minimalistic kernel-space driver that handles
 volume management, while keeping knowledge of the underlying device layout
 in user-space.  This makes it useful for not only LVM, but software raid,
 and other drivers that create "virtual" block devices.
 .
 This package contains a utility for modifying device mappings.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: dnsmasq-base
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 736
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: dnsmasq
Version: 2.75-1ubuntu0.16.04.5
Replaces: dnsmasq (<< 2.63-1~)
Depends: adduser, libc6 (>= 2.14), libdbus-1-3 (>= 1.9.14), libgmp10, libhogweed4, libidn11 (>= 1.13), libnetfilter-conntrack3, libnettle6
Recommends: dns-root-data
Breaks: dnsmasq (<< 2.63-1~)
Conffiles:
 /etc/dbus-1/system.d/dnsmasq.conf 9a18c8a761c2262dbf0c8b3345a85242
Description: Small caching DNS proxy and DHCP/TFTP server
 This package contains the dnsmasq executable and documentation, but
 not the infrastructure required to run it as a system daemon. For
 that, install the dnsmasq package.
Original-Maintainer: Simon Kelley <simon@thekelleys.org.uk>

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 416
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:3.3-3
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Original-Maintainer: Santiago Vila <sanvila@debian.org>
Homepage: http://www.gnu.org/software/diffutils/

Package: liblvm2app2.2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 1169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lvm2
Version: 2.02.133-1ubuntu10
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.15), libdevmapper-event1.02.1 (>= 2:1.02.74), libdevmapper1.02.1 (>= 2:1.02.110), libudev1 (>= 183)
Description: LVM2 application library
 This package contains the lvm2app shared library. It allows easier access
 to the basic LVM objects and provides functions to enumerate, create or
 modify them.
Homepage: http://sources.redhat.com/lvm2/
Original-Maintainer: Debian LVM Team <pkg-lvm-maintainers@lists.alioth.debian.org>

Package: libnfnetlink0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libnfnetlink
Version: 1.0.1-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: Netfilter netlink library
 libnfnetlink is the low-level library for netfilter related
 kernel/userspace communication. It provides a generic messaging
 infrastructure for in-kernel netfilter subsystems (such as
 nfnetlink_log, nfnetlink_queue, nfnetlink_conntrack) and their
 respective users and/or management tools in userspace.
Original-Maintainer: Alexander Wirt <formorer@debian.org>

Package: ubuntu-core-launcher
Status: install ok installed
Priority: optional
Section: oldlibs
Installed-Size: 110
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: snapd
Version: 2.40
Depends: snapd (= 2.40)
Pre-Depends: dpkg (>= 1.15.7.2)
Description: Transitional package for snapd
 This is a transitional dummy package. It can safely be removed.
Homepage: https://github.com/snapcore/snapd

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 919
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.2ubuntu2.1
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.2ubuntu2.1)
Recommends: update-motd
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init b46b23d64860d1557d2a8f44b231fd54
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: python3-urllib3
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 263
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-urllib3
Version: 1.13.1-2ubuntu0.16.04.3
Depends: python3:any (>= 3.3.2-2~), python3-six
Recommends: ca-certificates
Suggests: python3-ndg-httpsclient, python3-openssl, python3-pyasn1
Description: HTTP library with thread-safe connection pooling for Python3
 urllib3 supports features left out of urllib and urllib2 libraries.
 .
   - Re-use the same socket connection for multiple requests (HTTPConnectionPool
     and HTTPSConnectionPool) (with optional client-side certificate
     verification).
   - File posting (encode_multipart_formdata).
   - Built-in redirection and retries (optional).
   - Supports gzip and deflate decoding.
   - Thread-safe and sanity-safe.
   - Small and easy to understand codebase perfect for extending and
     building upon.
 .
 This package contains the Python 3 version of the library.
Homepage: http://urllib3.readthedocs.org
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: insserv
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1.14.0-5ubuntu3
Depends: libc6 (>= 2.14)
Suggests: bootchart2
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
 /etc/insserv.conf 3e9467113029a6356f57842085f3c849
Description: boot sequence organizer using LSB init.d script dependency information
 The insserv program is used by the standard SysV-based init system. It
 updates the order of symlinks in /etc/rc?.d/ based on dependencies
 specified by LSB headers in the init.d scripts themselves.
 .
 These declared relations between scripts make it possible to optimize
 the boot sequence for the currently installed set of packages, while
 detecting and rejecting dependency loops.
 .
 Using insserv incorrectly can result in an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Petter Reinholdtsen <pere@debian.org>

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1987
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-5
Version: 5.4.0-6ubuntu1~16.04.11
Replaces: libstdc++6-5-dbg (<< 4.9.0-3)
Depends: gcc-5-base (= 5.4.0-6ubuntu1~16.04.11), libc6 (>= 2.18), libgcc1 (>= 1:4.2)
Breaks: blockattack (<= 1.4.1+ds1-2.1build2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), chromium-browser (<= 43.0.2357.130-0ubuntu2), clustalx (<= 2.1+lgpl-2), dff (<= 1.3.0+dfsg.1-4.1build2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), flush (<= 0.9.12-3.1ubuntu1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2build1), innoextract (<= 1.4-1build1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 4.0.53-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.55.0, libcpprest2.2 (<= 2.2.0-1), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1build1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1build3), libdiet-client2.8 (<= 2.8.0-1build3), libdiet-sed2.8 (<= 2.8.0-1build3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4482~dfsg-3ubuntu3), libgmsh2 (<= 2.8.5+dfsg-1.1ubuntu1), libinsighttoolkit4.6 (<= 4.6.0-3ubuntu3), libkgeomap2 (<= 4:15.04.2-0ubuntu1), libkolabxml1 (<= 1.1.0-3), libkvkontakte1 (<= 1.0~digikam4.10.0-0ubuntu2), libmarisa0 (<= 0.2.4-8build1), libmediawiki1 (<= 1.0~digikam4.10.0-0ubuntu2), libogre-1.8.0 (<= 1.8.1+dfsg-0ubuntu5), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1ubuntu2), libpqxx-4.0 (<= 4.0.1+dfsg-3ubuntu1), libreoffice-core (<= 1:4.4.4~rc3-0ubuntu1), librime1 (<= 1.2+dfsg-2), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.6.3-0ubuntu7), mongodb-server (<= 1:2.6.3-0ubuntu7), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1build1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.19-1ubuntu2), photoprint (<= 0.4.2~pre2-2.3), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2build1), python-healpy (<= 1.8.1-1), python3-taglib (<= 0.3.6+dfsg-2build2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 4.0.53-1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3build1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libkrb5-3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 991
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: krb5
Version: 1.13.2+dfsg-5ubuntu2.1
Depends: libc6 (>= 2.16), libcomerr2 (>= 1.34), libk5crypto3 (>= 1.9+dfsg~beta1), libkeyutils1 (>= 1.5.9), libkrb5support0 (= 1.13.2+dfsg-5ubuntu2.1)
Recommends: krb5-locales
Suggests: krb5-doc, krb5-user
Breaks: libsmbclient (<= 2:3.6.1-2), sssd (<= 1.2.1-4.3)
Conflicts: libkrb53
Description: MIT Kerberos runtime libraries
 Kerberos is a system for authenticating users and services on a network.
 Kerberos is a trusted third-party service.  That means that there is a
 third party (the Kerberos server) that is trusted by all the entities on
 the network (users and services, usually called "principals").
 .
 This is the MIT reference implementation of Kerberos V5.
 .
 This package contains the runtime library for the main Kerberos v5 API
 used by applications and Kerberos clients.
Homepage: http://web.mit.edu/kerberos/
Original-Maintainer: Sam Hartman <hartmans@debian.org>

Package: libffi6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 52
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libffi
Version: 3.2.1-4
Depends: libc6 (>= 2.14)
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 21
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.4.5-1ubuntu2.1
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: http://people.redhat.com/sgrubb/audit/
Original-Maintainer: Laurent Bigonville <bigon@debian.org>

Package: initramfs-tools-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: initramfs-tools
Version: 0.122ubuntu8.14
Depends: libc6 (>= 2.4), libudev1 (>= 183)
Description: binaries used by initramfs-tools
 This package contains binaries used inside the initramfs images generated
 by initramfs-tools.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: libkrb5-26-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 633
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libasn1-8-heimdal (>= 1.6~git20131117), libc6 (>= 2.15), libcomerr2 (>= 1.41.11), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimbase1-heimdal (>= 1.6~git20131117), libhx509-5-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.7~git20150920), libsqlite3-0 (>= 3.5.9), libwind0-heimdal (>= 1.6~git20120311)
Description: Heimdal Kerberos - libraries
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the Kerberos 5 library.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 86
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.42.13-1ubuntu1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 560
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.6.0+git+20160126-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), debhelper (<< 9.20130504), guilt (<< 0.36-0.2), kernel-package (<< 13.000), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), sendmail (<< 8.14.4-5), switchconf (<< 0.0.9-2.1)
Conflicts: debconf (<< 1.5.50)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Original-Maintainer: Andreas Metzler <ametzler@debian.org>
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 210
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.2ubuntu2.1
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 35
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng
Version: 0.7.7-1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Original-Maintainer: Pierre Chifflier <pollux@debian.org>
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: dbus
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 537
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.10.6-1ubuntu3.4
Depends: libapparmor1 (>= 2.8.95), libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libcap-ng0, libdbus-1-3 (= 1.10.6-1ubuntu3.4), libexpat1 (>= 2.0.1), libselinux1 (>= 2.0.65), libsystemd0, lsb-base (>= 4.1+Debian11ubuntu7), adduser
Suggests: dbus-user-session | dbus-x11
Conffiles:
 /etc/default/dbus 0d0f25a2f993509c857eb262f6e22015
 /etc/init.d/dbus ec9a7d183ec50837a12aca3f9c95cc27
 /etc/init/dbus.conf f77985d342a32cdf82acfc74772ef203
Description: simple interprocess messaging system (daemon and utilities)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 This package contains the D-Bus daemon and related utilities.
 .
 The client-side library can be found in the libdbus-1-3 package, as it is no
 longer contained in this package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 384
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.27.1-6ubuntu3.8
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 1.32)
Description: device mounting library
 This device mounting library is used by mount and umount helpers.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: python3-configobj
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 183
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: configobj
Version: 5.0.6-2
Depends: python3-six, python3:any (>= 3.3.2-2~)
Suggests: python-configobj-doc
Description: simple but powerful config file reader and writer for Python 3
 ConfigObj is a simple but powerful config file reader and writer: an
 ini file round tripper. Its main feature is that it is very easy to
 use, with a straightforward programmer's interface and a simple
 syntax for config files. It has lots of other features, though:
 .
  * Nested sections (subsections), to any level
  * List values
  * Multiple line values
  * String interpolation (substitution)
  * Integrated with a powerful validation system
    + including automatic type checking/conversion
    + and allowing default values
    + repeated sections
  * All comments in the file are preserved
  * The order of keys/sections is preserved
  * Full Unicode support
  * Powerful unrepr mode for storing/retrieving Python data-types
 .
  This is the Python 3 version of the package.
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>
Homepage: http://www.voidspace.org.uk/python/configobj.html

Package: ethtool
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 311
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 1:4.5-1
Depends: libc6 (>= 2.14)
Conffiles:
 /etc/network/if-pre-up.d/ethtool 39693276fe35fccec75f610cb71d3e85
 /etc/network/if-up.d/ethtool b0d11ba5983c8c5990bb9933c35a3ec5
Description: display or change Ethernet device settings
 ethtool can be used to query and change settings such as speed, auto-
 negotiation and checksum offload on many network devices, especially
 Ethernet devices.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: https://www.kernel.org/pub/software/network/ethtool/

Package: libkeyutils1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 36
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: keyutils
Version: 1.5.9-8ubuntu1
Depends: libc6 (>= 2.14)
Description: Linux Key Management Utilities (library)
 Keyutils is a set of utilities for managing the key retention facility in the
 kernel, which can be used by filesystems, block devices and more to gain and
 retain the authorization and encryption keys required to perform secure
 operations.
 .
 This package provides a wrapper library for the key management facility system
 calls.
Homepage: http://people.redhat.com/~dhowells/keyutils/
Original-Maintainer: Christian Kastner <ckk@debian.org>

Package: libreadline5
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 324
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline5
Version: 5.2+dfsg-3build1
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Debian QA Group <packages@qa.debian.org>

Package: libsasl2-modules
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 222
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cyrus-sasl2
Version: 2.1.26.dfsg1-14ubuntu0.1
Depends: libc6 (>= 2.14), libssl1.0.0 (>= 1.0.0)
Suggests: libsasl2-modules-otp, libsasl2-modules-ldap, libsasl2-modules-sql, libsasl2-modules-gssapi-mit | libsasl2-modules-gssapi-heimdal
Breaks: logcheck-database (<= 1.3.16~)
Conffiles:
 /etc/logcheck/ignore.d.server/libsasl2-modules c032d5205f090a30661ae9f82a03f36e
Description: Cyrus SASL - pluggable authentication modules
 This is the Cyrus SASL API implementation, version 2.1. See package
 libsasl2-2 and RFC 2222 for more information.
 .
 This package provides the following SASL modules: LOGIN, PLAIN, ANONYMOUS,
 NTLM, CRAM-MD5, and DIGEST-MD5 (with DES support).
Original-Maintainer: Debian Cyrus SASL Team <pkg-cyrus-sasl2-debian-devel@lists.alioth.debian.org>
Homepage: http://www.cyrusimap.org/

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1192
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: shadow
Version: 1:4.2-3.1ubuntu5.4
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs be0977c1c1c84c62823c7d7d4e099067
 /etc/pam.d/login e796fb1e78dbb9fbaf52b972e91634b9
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty d9e5bf5e6bfa00ddd273a3bcf1a49bec
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: libgssapi3-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 312
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libasn1-8-heimdal (>= 1.4.0+git20110226), libc6 (>= 2.14), libcomerr2 (>= 1.01), libhcrypto4-heimdal (>= 1.4.0+git20110226), libheimntlm0-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.6~git20131117), libroken18-heimdal (>= 1.4.0+git20110226)
Conflicts: libgssapi3
Description: Heimdal Kerberos - GSSAPI support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
 .
 This package contains the library for GSSAPI support.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 708
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.60-26ubuntu1
Replaces: ja-trans (<= 0.8-2), netbase (<< 4.00)
Depends: libc6 (>= 2.14)
Conflicts: ja-trans (<= 0.8-2)
Description: NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".
Homepage: http://net-tools.berlios.de/
Original-Maintainer: net-tools Team <pkg-net-tools-maintainers@lists.alioth.debian.org>

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 648
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 3.113+nmu3ubuntu4
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.1.5.1-1.1ubuntu6), debconf | debconf-2.0
Suggests: liblocale-gettext-perl, perl-modules, ecryptfs-utils (>= 67-1)
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/
Original-Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>

Package: fonts-ubuntu-font-family-console
Status: install ok installed
Priority: optional
Section: fonts
Installed-Size: 40
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Source: ubuntu-font-family-sources
Version: 1:0.83-0ubuntu2
Description: Ubuntu Font Family Linux console fonts, sans-serif monospace
 The Ubuntu Font Family are a set of matching new libre/open fonts in
 development during 2010--2011. The development is being funded by
 Canonical Ltd on behalf the wider Free Software community and the
 Ubuntu project.  The technical font design work and implementation is
 being undertaken by Dalton Maag.
 .
 This package contains the "Ubuntu Mono" monospace members of the
 typeface, rendered for Linux console use.  These bitmap fonts can be
 loaded by dropping to a console with Ctrl-Alt-F1 and executing
 "setfont /usr/share/consolefonts/UbuntuMono*.psf"
 .
 Both the final font Truetype/OpenType files and the design files used
 to produce the font family are distributed under an open licence and
 you are expressly encouraged to experiment, modify, share and improve.
Original-Maintainer: Paul Sladen <ubuntu@paul.sladen.org>
Homepage: http://font.ubuntu.com/

Package: initscripts
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 169
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.3ubuntu2
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: mount (>= 2.11x-1), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.88dsf-50), sysv-rc | file-rc, coreutils (>= 5.93)
Recommends: psmisc, e2fsprogs
Breaks: aide (<< 0.15.1-5), atm-tools (<< 1:2.5.1-1.3), autofs (<< 5.0.0), bootchart (<< 0.10~svn407-4), console-common (<< 0.7.86), console-setup (<< 1.74), cruft (<< 0.9.16), eepc-acpi-scripts (<< 1.1.12), fcheck (<< 2.7.59-16), hostapd (<< 1:0.7.3-3), hurd (<< 0.5.git20131101~), ifupdown (<< 0.7.46), libpam-mount (<< 2.13-1), live-build (<< 3.0~a26-1), ltsp-client-core (<< 5.2.16-1), mdadm (<< 3.2.2-1), nbd-client (<< 1:2.9.23-1), nfs-common (<< 1:1.2.5-3), portmap (<< 6.0.0-2), readahead-fedora (<< 2:1.5.6-3), resolvconf (<< 1.49), rpcbind (<< 0.2.0-7), rsyslog (<< 5.8.2-2), selinux-policy-default (<= 2:0.2.20100524-9), splashy (<< 0.3.13-5.1+b1), sysklogd (<< 1.5-6.2), systemd (<< 228-5ubuntu3), util-linux (<< 2.26.2-4~), wpasupplicant (<< 0.7.3-4), xymon (<< 4.3.0~beta2.dfsg-9)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootmisc.sh b1cc3129e3045bb60bd18d99c5dc1357
 /etc/init.d/checkfs.sh fb72965ae6e43424c01b0d9d5b43d985
 /etc/init.d/checkroot.sh 74896125b097dfbfc0d0e15d2d04f20c
 /etc/init.d/checkroot-bootclean.sh f968128c0fc7bc81433e71eec88e30ff
 /etc/init.d/halt a0e668699f774d928ddc62954155adb5
 /etc/init.d/hostname.sh 2180072dbb4e2f42f7ad4df4a2f9888d
 /etc/init.d/killprocs 9866a64a5d3d34552b0c36f5667cdacd
 /etc/init.d/mountall.sh 5137a3cd0ad998c4e548c9d6bde8b672
 /etc/init.d/mountall-bootclean.sh 3e159968f2cd0fd8f6fb8d0e606b1ea4
 /etc/init.d/mountnfs.sh e6d04d2e3ac6f728baa3ca6c0eeb8006
 /etc/init.d/mountnfs-bootclean.sh 88b09d2279260128d40cbe314bff1b6d
 /etc/init.d/mountdevsubfs.sh 55612432fe9994baa8ad5a6776fb6af1
 /etc/init.d/mountkernfs.sh aed61dc8fffc89d6cbd518d4ad986518
 /etc/init.d/ondemand e1841131a99266c6376839f7c1edc021
 /etc/init.d/rc.local 7d505630f083ddc543cb68fbeb83a6b5
 /etc/init.d/reboot 39ce57bc053ad1bf9861347927d7db6b
 /etc/init.d/sendsigs 7e940b6c8a108a5beb2f51262ec9195c
 /etc/init.d/single bc7e38f0849ebfe767d162861fae002c
 /etc/init.d/umountfs 49f742a0f5af8124caba6c4264e78aa6
 /etc/init.d/umountnfs.sh 5137d5524cdba56d07e61c1cd5bb7238
 /etc/init.d/umountroot 871c0eb052da52d66d4a9b26efb8c7c8
 /etc/init.d/urandom e6454386bfce38efb5987dd06cb3b21d
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/rcS a4af750cc5d1edc264d47dc01d11e1b8
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: ca-certificates
Status: install ok installed
Priority: optional
Section: misc
Installed-Size: 426
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 20170717~16.04.2
Depends: openssl (>= 1.0.0), debconf (>= 0.5) | debconf-2.0
Breaks: ca-certificates-java (<< 20121112+nmu1)
Enhances: openssl
Description: Common CA certificates
 This package includes PEM files of CA certificates to allow SSL-based
 applications to check for the authenticity of SSL connections.
 .
 It includes, among others, certificate authorities used by the Debian
 infrastructure and those shipped with Mozilla's browsers.
 .
 Please note that Debian can neither confirm nor deny whether the
 certificate authorities whose certificates are included in this package
 have in any way been audited for trustworthiness or RFC 3647 compliance.
 Full responsibility to assess them belongs to the local system
 administrator.
Original-Maintainer: Michael Shuler <michael@pbandjelly.org>

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 57
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: acl
Version: 2.2.52-3
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/acl/

Package: openssh-client
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 3704
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: openssh
Version: 1:7.2p2-4ubuntu2.8
Replaces: ssh, ssh-krb5
Provides: rsh-client, ssh-client
Depends: libc6 (>= 2.17), libedit2 (>= 2.11-20080614), libgssapi-krb5-2 (>= 1.12.1+dfsg-2), libselinux1 (>= 1.32), libssl1.0.0 (>= 1.0.2), zlib1g (>= 1:1.1.4), adduser (>= 3.10), dpkg (>= 1.7.0), passwd
Recommends: xauth
Suggests: ssh-askpass, libpam-ssh, keychain, monkeysphere
Conflicts: sftp
Conffiles:
 /etc/ssh/moduli 0075fd4b72a421f909af9809d0dd3bdc
 /etc/ssh/ssh_config ac848ff6a465188e7dd91cf91dbe4889
Description: secure shell (SSH) client, for secure access to remote machines
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network. X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It can be used to provide applications with a secure communication
 channel.
 .
 This package provides the ssh, scp and sftp clients, the ssh-agent
 and ssh-add programs to make public key authentication more convenient,
 and the ssh-keygen, ssh-keyscan, ssh-copy-id and ssh-argv0 utilities.
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.
 .
 ssh replaces the insecure rsh, rcp and rlogin programs, which are
 obsolete for most purposes.
Homepage: http://www.openssh.com/
Original-Maintainer: Debian OpenSSH Maintainers <debian-ssh@lists.debian.org>

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 514
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20160213-1ubuntu1
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 6.0+20151017), libtinfo5 (<< 6.1~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: libprocps4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: procps
Version: 2:3.3.10-4ubuntu2.4
Replaces: procps (<< 1:3.3.2-1)
Depends: libc6 (>= 2.14), libsystemd0
Description: library for accessing process information from /proc
 The libprocps library is a way of accessing information out of the /proc
 filesystem.
 .
 This package contains the shared libraries necessary to run programs
 compilied with libprocps.
Homepage: http://gitorious.org/procps
Original-Maintainer: Craig Small <csmall@debian.org>

Package: acl
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 200
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.2.52-3
Depends: libacl1 (= 2.2.52-3), libc6 (>= 2.14)
Description: Access control list utilities
 This package contains the getfacl and setfacl utilities needed for
 manipulating access control lists.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://savannah.nongnu.org/projects/acl/

Package: dh-python
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 359
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.20151103ubuntu1.2
Replaces: python3 (<< 3.3.2-4~)
Depends: python3:any (>= 3.3.2-2~)
Suggests: libdpkg-perl
Breaks: python3 (<< 3.3.2-4~)
Description: Debian helper tools for packaging Python libraries and applications
 This package contains:
  * pybuild - invokes various build systems for requested Python versions in
    order to build modules and extensions
  * dh_python2 - calculates Python 2.X dependencies for Debian packages,
    adds maintainer scripts to byte compile files, etc.
  * dh_python3 - calculates Python 3.X dependencies for Debian packages,
    adds maintainer scripts to byte compile files, etc.
  * dh_pypy - calculates PyPy dependencies for Debian packages,
    adds maintainer scripts to byte compile files, etc.
Original-Maintainer: Piotr Ożarowski <piotr@debian.org>

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 243
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 3.0pl1-128ubuntu2
Provides: cron-daemon
Depends: libc6 (>= 2.7), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), init-system-helpers (>= 1.18~), lsb-base (>= 4.1+Debian11ubuntu7), debianutils (>= 1.7), adduser, libpam-runtime (>= 1.0.1-11)
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: anacron (>= 2.0-1), logrotate, checksecurity, exim4 | postfix | mail-transport-agent
Breaks: dpkg (<< 1.15.4)
Conffiles:
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/crontab 8f111d100ea459f68d333d63a8ef2205
 /etc/default/cron 7bd39371e1c10e74dd3d37a58cc186f8
 /etc/init.d/cron 85d7a3783889ea93dcda2fb488420c1c
 /etc/init/cron.conf 1ed11393cd5e5e45d7d14c0e9d028fde
 /etc/pam.d/cron 11e788a7f7cd5477b10da2c7fd5ecdf0
Description: process scheduling daemon
 The cron daemon is a background process that runs particular programs at
 particular times (for example, every minute, day, week, or month), as
 specified in a crontab. By default, users may also create crontabs of
 their own so that processes are run on their behalf.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package does not provide any system maintenance tasks. Basic
 periodic maintenance tasks are provided by other packages, such
 as checksecurity.
Homepage: http://ftp.isc.org/isc/cron/
Original-Maintainer: Maintainer: Javier Fernández-Sanguino Peña <jfs@debian.org>

Package: libmnl0
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 60
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.3-5
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://netfilter.org/projects/libmnl/

Package: ifenslave
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 87
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 2.7ubuntu1
Replaces: ifenslave-2.6 (<< 1.1.0-22)
Depends: ifupdown (>= 0.7.46), iproute2
Recommends: net-tools
Breaks: ifenslave-2.6 (<< 1.1.0-22)
Conffiles:
 /etc/network/if-post-down.d/ifenslave b120c1031f311aedc210a0b8e77e9bee
 /etc/network/if-pre-up.d/ifenslave 9ea8a3f2397024284ffa7c15d54cfa72
 /etc/network/if-up.d/ifenslave 8f4eb032513f644b863e6870a7dd5da3
Description: configure network interfaces for parallel routing (bonding)
 This is a tool to attach and detach slave network interfaces to a bonding
 device. A bonding device will act like a normal Ethernet network device to
 the kernel, but will send out the packets via the slave devices using a simple
 round-robin scheduler. This allows for simple load-balancing, identical to
 "channel bonding" or "trunking" techniques used in switches.
 .
 The kernel must have support for bonding devices for ifenslave to be useful.
 This package supports 2.6.x kernels and the recent 3.x.x kernels.
Original-Maintainer: Guus Sliepen <guus@debian.org>

Package: libusb-0.1-4
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 56
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libusb
Version: 2:0.1.12-28
Replaces: libusb-dev (<< 2:0.1.12-25)
Depends: libc6 (>= 2.15)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 This package contains what you need to run programs that use this
 library.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/

Package: python3-debian
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 203
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: python-debian
Version: 0.1.27ubuntu2
Depends: python3-chardet, python3-six (>> 1.4~), python3:any (>= 3.3.2-2~)
Recommends: python3-apt
Suggests: gpgv
Description: Python 3 modules to work with Debian-related data formats
 This package provides Python 3 modules that abstract many formats of Debian
 related files. Currently handled are:
  * Debtags information (debian.debtags module)
  * debian/changelog (debian.changelog module)
  * Packages files, pdiffs (debian.debian_support module)
  * Control files of single or multiple RFC822-style paragraphs, e.g.
    debian/control, .changes, .dsc, Packages, Sources, Release, etc.
    (debian.deb822 module)
  * Raw .deb and .ar files, with (read-only) access to contained
    files and meta-information
Original-Maintainer: Debian python-debian Maintainers <pkg-python-debian-maint@lists.alioth.debian.org>

Package: libapparmor-perl
Status: install ok installed
Priority: extra
Section: perl
Installed-Size: 212
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Source: apparmor
Version: 2.10.95-0ubuntu2.11
Depends: perl-base (>= 5.22.1-9ubuntu0.6), perlapi-5.22.1, libapparmor1 (>= 2.10.95), libc6 (>= 2.14)
Description: AppArmor library Perl bindings
 This provides the Perl module that contains the language bindings
 for the AppArmor library, libapparmor, which were autogenerated via
 SWIG.
Homepage: http://apparmor.net/
Original-Maintainer: Debian AppArmor Team <pkg-apparmor-team@lists.alioth.debian.org>

Package: ssh-import-id
Status: install ok installed
Priority: extra
Section: misc
Installed-Size: 51
Maintainer: Dustin Kirkland <kirkland@ubuntu.com>
Architecture: all
Version: 5.5-0ubuntu1
Depends: ca-certificates, openssh-client, python3-requests (>= 1.1.0), wget, python3:any (>= 3.3.2-2~)
Recommends: openssh-server
Conffiles:
 /etc/ssh/ssh_import_id f92d9edbab801eed9d6b464975da229f
Description: securely retrieve an SSH public key and install it locally
 This utility will securely contact a public keyserver (Launchpad.net by
 default, but Github.com is also supported), retrieve one or more user's
 public keys, and append these to the current user's ~/.ssh/authorized_keys
 file.
Homepage: http://launchpad.net/ssh-import-id

Package: libheimntlm0-heimdal
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: heimdal
Version: 1.7~git20150920+dfsg-4ubuntu1.16.04.1
Depends: libc6 (>= 2.4), libhcrypto4-heimdal (>= 1.4.0+git20110226), libkrb5-26-heimdal (>= 1.4.0+git20110226), libroken18-heimdal (>= 1.4.0+git20110226), libwind0-heimdal (>= 1.4.0+git20110226)
Description: Heimdal Kerberos - NTLM support library
 Heimdal is a free implementation of Kerberos 5 that aims to be
 compatible with MIT Kerberos.
Homepage: http://www.h5l.org/
Original-Maintainer: Brian May <bam@debian.org>

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 555
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.4-2
Depends: libc6 (>= 2.14)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Original-Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Homepage: http://userspace.selinuxproject.org/

Package: python3-jwt
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 79
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pyjwt
Version: 1.3.0-1ubuntu0.1
Depends: python3:any (>= 3.3.2-2~)
Recommends: python3-cryptography
Suggests: python3-crypto
Description: Python 3 implementation of JSON Web Token
 PyJWT implements the JSON Web Token draft 01, a way of representing
 signed content using JSON data structures.
 .
 Supported algorithms for cryptographic signing:
 .
   * HS256 - HMAC using SHA-256 hash algorithm (default)
   * HS384 - HMAC using SHA-384 hash algorithm
   * HS512 - HMAC using SHA-512 hash algorithm
   * RS256 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-256 hash
     algorithm
   * RS384 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-384 hash
     algorithm
   * RS512 - RSASSA-PKCS1-v1_5 signature algorithm using SHA-512 hash
     algorithm
 .
 Supported reserved claim names:
   - "exp" (Expiration Time) Claim
 .
 This package contains the Python 3 version of the library.
Homepage: https://github.com/jpadilla/pyjwt
Original-Maintainer: Debian Python Modules Team <python-modules-team@lists.alioth.debian.org>

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 240
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.32-3ubuntu1.2
Replaces: libidn11-dev
Depends: libc6 (>= 2.14)
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/
Original-Maintainer: Debian Libidn Team <help-libidn@gnu.org>

Package: libmpdec2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 247
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: mpdecimal
Version: 2.4.2-1
Replaces: libmpdec2.3
Depends: libc6 (>= 2.14)
Breaks: libmpdec2.3
Description: library for decimal floating point arithmetic (runtime library)
 mpdecimal is a package for correctly-rounded arbitrary precision decimal
 floating point arithmetic.
Original-Maintainer: Matthias Klose <doko@debian.org>
Homepage: http://www.bytereef.org/mpdecimal/index.html

Package: fuse
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 104
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Version: 2.9.4-1ubuntu3.1
Depends: libc6 (>= 2.14), libfuse2 (= 2.9.4-1ubuntu3.1), adduser, mount (>= 2.19.1), sed (>= 4)
Conffiles:
 /etc/fuse.conf 298587592c8444196833f317def414f2
Description: Filesystem in Userspace
 Filesystem in Userspace (FUSE) is a simple interface for userspace programs to
 export a virtual filesystem to the Linux kernel. It also aims to provide a
 secure method for non privileged users to create and mount their own filesystem
 implementations.
Homepage: http://fuse.sourceforge.net/
Original-Maintainer: Laszlo Boszormenyi (GCS) <gcs@debian.org>

Package: ubuntu-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 46
Maintainer: Michael Vogt <michael.vogt@canonical.com>
Architecture: all
Multi-Arch: foreign
Version: 2012.05.19
Recommends: gpgv
Description: GnuPG keys of the Ubuntu archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libdbus-1-3
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 437
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: dbus
Version: 1.10.6-1ubuntu3.4
Depends: libc6 (>= 2.17), libsystemd0
Recommends: dbus
Breaks: dbus (<< 1.9.16-1~)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gccgo-6 (6.0.1-0ubuntu1)
Version: 1:6.0.1-0ubuntu1
Depends: gcc-6-base (= 6.0.1-0ubuntu1), libc6 (>= 2.14)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libreadline6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 382
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: readline6
Version: 6.3-8ubuntu2
Depends: readline-common, libc6 (>= 2.15), libtinfo5 (>= 6)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: python3-distupgrade
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 626
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ubuntu-release-upgrader
Version: 1:16.04.26
Replaces: python3-update-manager (<< 1:0.165)
Depends: python3:any (>= 3.3.2-2~), python3-update-manager (>= 1:0.196.2~), python3-apt (>= 0.8.5~), lsb-release
Breaks: python3-update-manager (<< 1:0.165)
Description: manage release upgrades
 This is the DistUpgrade Python 3 module

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3238
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 2.27.1-6ubuntu3.8
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.1~)
Depends: lsb-base (>= 4.1+Debian11ubuntu7), sysvinit-utils (>= 2.88dsf-59.1~)
Pre-Depends: libaudit1 (>= 1:2.2.1), libblkid1 (>= 2.25), libc6 (>= 2.15), libfdisk1 (>= 2.27~rc1), libmount1 (>= 2.25), libncursesw5 (>= 6), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsmartcols1 (>= 2.27~rc1), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), cloud-guest-utils (<< 0.27-0ubuntu16), grml-debootstrap (<< 0.68), mac-fdisk (<< 0.1-16ubuntu3), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), pmac-fdisk (<< 0.1-16ubuntu3)
Conffiles:
 /etc/cron.weekly/fstrim 3fa238f00fb4f5c543709e80abb98dfc
 /etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
 /etc/init/hwclock-save.conf be6e51abc290276742f1e77f6652e106
 /etc/init/hwclock.conf 0bd420e7f81a2ea80d64f8a57a24c78e
 /etc/init/hwclock.sh.conf 55a27396b54021d912e15dbf394a31a3
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: gcc-5-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 66
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: gcc-5
Version: 5.4.0-6ubuntu1~16.04.11
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 273
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: ustr
Version: 1.0.4-5
Depends: libc6 (>= 2.14)
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library.
Original-Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Homepage: http://www.and.org/ustr/

Package: liblzo2-2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 180
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: lzo2
Version: 2.08-1.2
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Description: data compression library
 LZO is a portable, lossless data compression library.
 It offers pretty fast compression and very fast decompression.
 Decompression requires no memory.  In addition there are slower
 compression levels achieving a quite competitive compression ratio
 while still decompressing at this very high speed.
Original-Maintainer: Peter Eisentraut <petere@debian.org>
Homepage: http://www.oberhumer.com/opensource/lzo/

Package: libwrap0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 121
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: tcp-wrappers
Version: 7.6.q-25
Replaces: tcpd (<< 7.6.q-20)
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Recommends: tcpd
Breaks: tcpd (<< 7.6.q-20)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests.
 .
 Security options are:
  - access control per host, domain and/or service;
  - detection of host name spoofing or host address spoofing;
  - booby traps to implement an early-warning system.
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libpython3.5-minimal
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 3756
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: python3.5
Version: 3.5.2-2ubuntu0~16.04.8
Depends: libc6 (>= 2.14), libssl1.0.0 (>= 1.0.2~beta3)
Recommends: libpython3.5-stdlib
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python3.5/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 3.5)
 This package contains some essential modules. It is normally not
 used on it's own, but as a dependency of python3.5-minimal.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 304
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: foreign
Version: 4.2.2-7
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Original-Maintainer: Clint Adams <clint@debian.org>
Homepage: http://www.gnu.org/software/sed/

Package: cloud-init
Status: install ok installed
Priority: extra
Section: admin
Installed-Size: 1975
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 19.2-24-ge7881d5c-0ubuntu1~16.04.1
Replaces: ec2-init (<< 0.5.3)
Provides: ec2-init
Depends: cloud-guest-utils | cloud-utils, ifupdown (>= 0.6.10ubuntu5), procps, python3, python3-requests (>= 0.8.2), python3-serial, debconf (>= 0.5) | debconf-2.0, init-system-helpers (>= 1.18~), python3-configobj, python3-jinja2, python3-jsonpatch, python3-oauthlib, python3-six, python3-yaml, python3:any (>= 3.3.2-2~)
Recommends: eatmydata, gdisk, software-properties-common
Breaks: walinuxagent (<< 2.1.3-0ubuntu4.1)
Conflicts: ec2-init (<< 0.5.3)
Conffiles:
 /etc/NetworkManager/dispatcher.d/hook-network-manager 5fe06610f28360e90a8c04febddd384b
 /etc/cloud/cloud.cfg 8afd2660e52e2bdeed8d204a1c02081e
 /etc/cloud/cloud.cfg.d/05_logging.cfg aaed6d73c960381f36743c24a1603aab
 /etc/cloud/cloud.cfg.d/README 4d1d62d930571121d5256ef77ce9f519
 /etc/cloud/templates/chef_client.rb.tmpl 162f5c6b365338e9905cbce06c58c073
 /etc/cloud/templates/chrony.conf.debian.tmpl f6afc8fb02df02a7fad7672a67d34320
 /etc/cloud/templates/chrony.conf.fedora.tmpl 8f56d3a782ade6693badf3832775fc82
 /etc/cloud/templates/chrony.conf.opensuse.tmpl b7ff0b11f9bded1fc0be5f8806152541
 /etc/cloud/templates/chrony.conf.rhel.tmpl 65413a48dedb31d23c93ac417e1a35e8
 /etc/cloud/templates/chrony.conf.sles.tmpl b7ff0b11f9bded1fc0be5f8806152541
 /etc/cloud/templates/chrony.conf.ubuntu.tmpl 1ce60fc8d7ab2a82cdf3e572fb9709ff
 /etc/cloud/templates/hosts.debian.tmpl 0f19ecd06c3e71f7c8ee1e864b0e22e9
 /etc/cloud/templates/hosts.freebsd.tmpl 4b24f77244877db02fa3cccef97b0827
 /etc/cloud/templates/hosts.redhat.tmpl bd5a1edd50c1d8b27c5f51ed44040c19
 /etc/cloud/templates/hosts.suse.tmpl 40c33f8cb1c8c4cd1e8c7571303f1346
 /etc/cloud/templates/ntp.conf.debian.tmpl 4234ee67d84a3da62e0d97c7329668df
 /etc/cloud/templates/ntp.conf.fedora.tmpl eb6d3fe3d4ddebfe0e310843e8bbc82b
 /etc/cloud/templates/ntp.conf.opensuse.tmpl e4bb5100b2dc442b6237ac7e1635acaa
 /etc/cloud/templates/ntp.conf.rhel.tmpl 3437363e2f2dd82c94f8c787fc957ee8
 /etc/cloud/templates/ntp.conf.sles.tmpl e4bb5100b2dc442b6237ac7e1635acaa
 /etc/cloud/templates/ntp.conf.ubuntu.tmpl 645795fb4ef5d9801111f7d1eb27d91d
 /etc/cloud/templates/resolv.conf.tmpl 169f36939305409fffb0e9a4bee27b30
 /etc/cloud/templates/sources.list.debian.tmpl fffcef4f450068888000cc368fb1c5d9
 /etc/cloud/templates/sources.list.ubuntu.tmpl b9f68f7e572d59a2af0c9758bc2ed1f2
 /etc/cloud/templates/timesyncd.conf.tmpl 9c6b3af8058efc219987863f45bb9198
 /etc/dhcp/dhclient-exit-hooks.d/hook-dhclient aa6f407b6895c130f2809755373e739f
 /etc/init/cloud-config.conf 710d4e0ddc05367b20bc0b735de0f412
 /etc/init/cloud-final.conf 9a24e799bc63d122deaa66fff6d2997f
 /etc/init/cloud-init-blocknet.conf 8283f3ae87e737c4bbc48e51a3a851e6
 /etc/init/cloud-init-container.conf 216ae1b50f1637ce7db5f7e1339d8106
 /etc/init/cloud-init-local.conf 632f72e54cd45e36715862d90e7eb26c
 /etc/init/cloud-init-nonet.conf 45fac884b97aa61c5d62d785ca9bc5c6
 /etc/init/cloud-init.conf 705063cec926d28fb635427258aa2b9b
 /etc/init/cloud-log-shutdown.conf 46c340d8f517cbf42562ee6e516908ed
 /etc/profile.d/Z99-cloud-locale-test.sh d21d24035fbd71d94b167aebc2385be3
 /etc/profile.d/Z99-cloudinit-warnings.sh 0c6c968d0de8a9141d8ae0a87c5f0293
 /etc/rsyslog.d/21-cloudinit.conf d4cf2e5d3cb9914cf7e6cdc08d298339
Description: Init scripts for cloud instances
 Cloud instances need special scripts to run during initialisation
 to retrieve and install ssh keys and to let the user run various scripts.

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 236
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.27.1-6ubuntu3.8
Depends: libc6 (>= 2.17)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.
Original-Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>

Package: libcryptsetup4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 219
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: amd64
Multi-Arch: same
Source: cryptsetup
Version: 2:1.6.6-5ubuntu2.1
Depends: libc6 (>= 2.17), libdevmapper1.02.1 (>= 2:1.02.97), libgcrypt20 (>= 1.6.1), libuuid1 (>= 2.16), libgpg-error0 (>= 1.10-0.1)
Description: disk encryption support - shared library
 Cryptsetup provides an interface for configuring encryption on block
 devices (such as /home or swap partitions), using the Linux kernel
 device mapper target dm-crypt. It features integrated Linux Unified Key
 Setup (LUKS) support.
 .
 This package provides the libcryptsetup shared library.
Homepage: http://code.google.com/p/cryptsetup/
Original-Maintainer: Debian Cryptsetup Team <pkg-cryptsetup-devel@lists.alioth.debian.org>

Package: netbase
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 66
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Multi-Arch: foreign
Version: 5.3
Depends: lsb-base (>= 3.0-6)
Recommends: ifupdown
Breaks: ifupdown (<< 0.7)
Conffiles:
 /etc/rpc f0b6f6352bf886623adc04183120f83b
 /etc/protocols bb9c019d6524e913fd72441d58b68216
 /etc/services 7d9960c77b363e2c2f41b77733cf57d4
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.
Original-Maintainer: Marco d'Itri <md@linux.it>

